Jak rozebrać Artemisa.pdf

ARTEMIS INSIDE

(HTC P3300)

This is not the guide on how to disassemble Artemis phone, but may help for people who wish to see what

is inside.

Equipment and tools you will need :

- Torex M-5 screwdriver

- Set of small regular and philips screwdrivers

- Cleaning tissues (or similar)

- Tweezers

- Plastic stick. This is something you make your own. When you will open body of the device, you will need

it to put in a gap to disassemble parts of device. You can use a wooden stick.

!! Don’t do it with screwdriver or metal things, because you will scratch the body.

Artemis Inside v. 01

Page 1 of 16

1. Turn off the device. Disconnect charges, USB cables.

It would be a good idea to cover screen of device to avoid scratches. It should be fine if you use protection

film on your device.

2. Pull out the stylus.

3. Remove the battery and the micro SD card from your device.

Do not short battery pins, do not disassemble it. J

Artemis Inside v. 01

Page 2 of 16

4. Open the antenna cover with plastic stick, ~1 mm thick. Insert the stick between the body and antenna

cover and turn it slightly.

Be careful, don’t press or push too hard to avoid damage of fastening elements.

This part of antenna cover opens quite easy.

To completely remove the antenna cover, you can use wooden stick about 1.0mm - 1.5mm thick.

You can use screwdriver, but carefully, not to leave scratches on the body of the device.

Don’t pull antenna cover in vertical direction (see on the picture), because it will destroy clamping

elements.

Artemis Inside v. 01

Page 3 of 16

To understand how clamping of the cover is organized, see picture below, this will help to avoid damage of

these materials.

Artemis Inside v. 01

Page 4 of 16

Artemis Inside v. 01

Page 5 of 16