g4cube.pdf

(3719 KB) Pobierz
459944468 UNPDF
Service Source
Power Mac G4 Cube
Updated June 2, 2003
© 2002 Apple Computer, Inc. All rights reserved.
459944468.019.png 459944468.020.png
Service Source
Take Apart
Power Mac G4 Cube
© 2002 Apple Computer, Inc. All rights reserved.
459944468.021.png 459944468.022.png
General Instructions
Tools
The following tools are recommended for the Take Apart procedures:
• ESD wriststrap and mat
• Flat -blade screwdriver
• Magnetized Phillips screwdriver
• Torx T8 screwdriver
• Torx T10 screwdriver
• Pliers
• Jeweler’s Phillips screwdriver
• Black stick (or other nonconductive plastic or nylon tool)
To organize the screws you remove from the assembly, use a tray with divided
compartments (such as a plastic ice cube tray).
Serial Number Location
In this computer, the product serial number is located on the base near the computer
latch.
General Instructions
Power Mac G4 Cube Take Apart -
1
Note:
459944468.001.png
Computer Enclosure
Tools
No tools are required for this procedure.
Preliminary Steps
Before you begin, turn off the computer.
Procedure
Warning: Always turn off the computer before opening it to avoid damaging its
internal components.
1. Place the computer on a clean, at surface.
2. Shut down the computer, and wait ve minutes for the computer’s internal components
to cool down.
3. Unplug all cables from the computer except the power cord.
If you have never plugged in the computer, connect the computer’s
power cord and plug it in.
4. Turn the computer on its side on a soft, clean cloth, and ground yourself by touching
the bare metal between the video ports.
Touch
Bare
Metal
2 -
Power Mac G4 Cube Take Apart
Computer Enclosure
Note:
459944468.002.png 459944468.003.png 459944468.004.png 459944468.005.png 459944468.006.png 459944468.007.png
To avoid electrostatic discharge, always ground yourself by
touching the bare metal before you touch any parts or install any components
inside the computer. To avoid static electricity building back up in your body,
do not walk around the room until you have completed the installation and
closed the computer.
5. Unplug the power cord.
6. Turn the computer upside down, and push down on the latch to release it. Allow the
latch to extend completely.
Latch
Extended Latch
7. Gently pull the core from the computer enclosure and place the core on a soft cloth.
Core
Enclosure
Computer Enclosure
Power Mac G4 Cube Take Apart -
3
Important:
459944468.008.png 459944468.009.png 459944468.010.png 459944468.011.png 459944468.012.png 459944468.013.png 459944468.014.png 459944468.015.png 459944468.016.png 459944468.017.png 459944468.018.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin