BMX501GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

BMW

X5*

YEAR 01 ﬁ

PETROL

DIESEL

MAKE

MOD.

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the passenger’s side wheelhouse.

CENTRAL POSITION

Install the modular systems and the modules behind the glove box under the dashboard,

passenger’s side.

POWER SUPPLY

+ 30: connect to the RED wire located in the wiring harness along the steering column.

- 31: connect to a ground terminal located behind the left lateral bulkhead, driver’s side.

IGNITION WIRE

+15/54: connect to the wire with the function of ignition wire located in the ignition key.

DIRECTION INDICATORS

Connect to the wires: BLUE/GREEN at the position nr.11 (ant.left), BLUE/BROWN at the

position nr.12 (post.right), BLUE/YELLOW at the position nr.14 (lat.left) located in the wiring

harness of the 15 way white connector; BLUE/GREEN at the position nr.8 (post.left),

BLUE/BROWN at the position nr.6 (ant. right), BLUE/YELLOW at the position nr.14 (lat. right)

located in the wiring harness coming out of the 15 way black connector located on the coming

out of the lights module, on the right of the passenger’s side glove compartment, behind the

covering.

Refer to the diagram nr.147.

ELECTRIC WINDOWS

Negative control signal

The Comfort closing of the windows is obtained timing at 24s. the LIGHT BLUE/RED wire at

the position nr.4.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Art.3800 Vehicle Position

YELLOW/BLACK BLACK Pos. nr. 6, 20 way black connector.

GREY/BLACK BLUE Pos. nr.14, 20 way black connector.

VIOLET LIGHT BLUE/RED Pos. nr. 4, 12 way black (white) connector.

ORANGE WHITE7BLACK Pos. nr. 3, 12 way black (white)connector.

VIOLET/WHITE ground car body

ORANGE/WHITE positive supply in the fuse box.

The 20 way black connector is located in the central locking unit placed behind the passenger’s

side glove compartment. The 12 way black (white) connector is located on the coming out of

the buttons controls inside the driver’s side door.

Refer to C diagram in the dedicated installations manual, inside the kit of the antitheft.

IMMOBILISATION POINT

Fuel pump

Cut the 1,5 mm 2 GREEN/BLACK wire located in the wiring harness coming out of the fuse

marked F14, in the fuse box placed under the passenger’s side dashboard.

STARTER

+50: cut the 3 mm 2 BLACK/YELLOW wire located in the wiring harness coming out of the

connector of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS AND BOOT

SWITCHES

Connect to the RED/BLUE wire, at the position nr. 20, located in the wiring harness coming out

of the 20 way black connector on the coming out of the central locking unit placed behind the

glove compartment, passenger’s side.

Attention: as the polarity of the doors is at a positive control signal, it is necessary to invert the

signal by using a supplementary relay.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

bmx501gbbt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM N°147

Diagram for direction indicators connection for BMW X5

YELLOW YELLOW

15 way

white connector

BLUE/GREEN Pos. nr.11

BLUE/BROWN Pos. nr.12

BLUE/YELLOW Pos. nr.14

BLUE/GREEN Pos. nr. 8

BLUE/BROWN Pos. nr. 6

BLUE/YELLOW Pos. nr.14

15 way

black connector

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

bmx501gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: