T993_330_01_SG_EDU.pdf

PTC Global Services

Advanced Design and Analysis with

Pro/ENGINEER Wildfire

T993-330-01

Advanced Design and Analysis with Pro/ENGINEER Wildfire

User and training documentation from Parametric Technology Corporation (PTC) is subject to the copyright laws of the

United States and other countries and is provided under a license agreement that restricts copying, disclosure, and use of

such documentation. PTC hereby grants to the licensed user the right to make copies in printed form of this documentation

if provided on software media, but only for internal/personal use and in accordance with the license agreement under which

the applicable software is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice

provided by PTC. This documentation may not be disclosed, transferred, modified, or reduced to any form, including

electronic media, or transmitted or made publicly available by any means without the prior written consent of PTC and no

authorization is granted to make copies for such purposes.

Information described herein is furnished for general information only, is subject to change without notice, and should not be

construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors or inaccuracies

that may appear in this document.

The software described in this document is provided under written license agreement, contains valuable trade secrets and

proprietary information, and is protected by the copyright laws of the United States and other countries. It may not be copied

or distributed in any form or medium, disclosed to third parties, or used in any manner not provided for in the software

licenses agreement except with written prior approval from PTC. UNAUTHORIZED USE OF SOFTWARE OR ITS

DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION.

Registered Trademarks Of Parametric Technology Corporation or a Subsidiary

Advanced Surface Design, CADDS, Computervision, Computervision Services, Electronic Product Definition, EPD,

EPD.Connect, Expert Machinist, Flexible Engineering, HARNESSDESIGN, Info*Engine, InPart, Optegra, Parametric

Technology, Parametric Technology Corporation, PHOTORENDER, Pro/DESKTOP, Pro/E, Pro/ENGINEER, Pro/HELP,

Pro/INTRALINK, Pro/MECHANICA, Pro/TOOLKIT, PTC, PT/Products, Shaping Innovation, and Windchill.

Trademarks of Parametric Technology Corporation or a Subsidiary

3DPAINT, Associative Topology Bus, Behavioral Modeling, CDRS, CounterPart, Create Collaborate Control, CV, CVact,

CVaec, CVdesign, CV-DORS, CVMAC, CVNC, CVToolmaker, DataDoctor, DesignSuite, DIMENSION III, DIVISION, DVS,

DVSAFEWORK, EDE, e/ENGINEER, Electrical Design Entry, EMX, eNC Explorer, Expert MoldBase, Expert Toolmaker,

GRANITE, ISSM, KDiP, Knowledge Discipline in Practice, Knowledge System Driver, ModelCHECK, MoldShop, NC Builder,

PartSpeak, Pro/ANIMATE, Pro/ASSEMBLY, Pro/CABLING, Pro/CASTING, Pro/CDT, Pro/CMM, Pro/COLLABORATE,

Pro/COMPOSITE, Pro/CONCEPT, Pro/CONVERT, Pro/DATA for PDGS, Pro/DESIGNER, Pro/DETAIL, Pro/DIAGRAM,

Pro/DIEFACE, Pro/DRAW, Pro/ECAD, Pro/ENGINE, Pro/FEATURE, Pro/FEM-POST, Pro/FICIENCY, Pro/FLY-THROUGH,

Pro/HARNESS, Pro/INTERFACE, Pro/LANGUAGE, Pro/LEGACY, Pro/LIBRARYACCESS, Pro/MESH, Pro/Model.View,

Pro/MOLDESIGN, Pro/NC-ADVANCED, Pro/NC-CHECK, Pro/NC-MILL, Pro/NCPOST, Pro/NC-SHEETMETAL,

Pro/NC-TURN, Pro/NC-WEDM, Pro/NC-Wire EDM, Pro/NETWORK ANIMATOR, Pro/NOTEBOOK, Pro/PDM,

Pro/PHOTORENDER, Pro/PIPING, Pro/PLASTIC ADVISOR, Pro/PLOT, Pro/POWER DESIGN, Pro/PROCESS,

Pro/REPORT, Pro/REVIEW, Pro/SCAN-TOOLS, Pro/SHEETMETAL, Pro/SURFACE, Pro/VERIFY, Pro/Web.Link,

Pro/Web.Publish, Pro/WELDING, Product Development Means Business, Product First, Products First, ProductView,

PTC Precision, Shrinkwrap, The Product Development Company, The Way to Product First, Wildfire,

Windchill DynamicDesignLink, Windchill PartsLink, Windchill PDMLink, Windchill ProjectLink, and Windchill SupplyLink.

Third-Party Trademarks

Adobe is a registered trademark of Adobe Systems. Advanced ClusterProven, ClusterProven, and the ClusterProven design

are trademarks or registered trademarks of International Business Machines Corporation in the United States and other

countries and are used under license. IBM Corporation does not warrant and is not responsible for the operation of this

software product. AIX is a registered trademark of IBM Corporation. Allegro, Cadence, and Concept are registered

trademarks of Cadence Design Systems, Inc. AutoCAD is a registered trademark of Autodesk, Inc. Baan is a registered

trademark of Baan Company. CADAM and CATIA are registered trademarks of Dassault Systems. COACH is a trademark

of CADTRAIN, Inc. DOORS is a registered trademark of Telelogic AB. FLEX lm is a registered trademark of GLOBEtrotter

Software, Inc. Geomagic is a registered trademark of Raindrop Geomagic, Inc.

EVERSYNC, GROOVE, GROOVEFEST, GROOVE.NET, GROOVE NETWORKS, iGROOVE, PEERWARE, and the

interlocking circles logo are trademarks of Groove Networks, Inc. Helix is a trademark of Microcadam, Inc. HOOPS is a

trademark of Tech Soft America, Inc. HP-UX is a registered trademark and Tru64 is a trademark of the Hewlett-Packard

Company. I-DEAS, Metaphase, Parasolid, SHERPA, Solid Edge, and Unigraphics are trademarks or registered trademarks

of Electronic Data Systems Corporation (EDS). InstallShield is a registered trademark and service mark of InstallShield

Software Corporation in the United States and/or other countries. Intel is a registered trademark of Intel Corporation. IRIX is

a registered trademark of Silicon Graphics, Inc. MatrixOne is a trademark of MatrixOne, Inc. Mentor Graphics and

Board Station are registered trademarks and 3D Design, AMPLE, and Design Manager are trademarks of Mentor Graphics

Corporation. Netscape and the Netscape N and Ship's Wheel logos are registered trademarks of Netscape Communications

Corporation in the U.S. and other countries. Oracle is a registered trademark of Oracle Corporation. OrbixWeb is a

registered trademark of IONA Technologies PLC. PDGS is a registered trademark of Ford Motor Company. RAND is a

trademark of RAND Worldwide. Rational Rose is a registered trademark of Rational Software Corporation. RetrievalWare is

a registered trademark of Convera Corporation. RosettaNet is a trademark and Partner Interface Process and PIP are

registered trademarks of ÐRosettaNet,Ñ a non-profit organization. SAP and R/3 are registered trademarks of

SAP AG Germany.

SolidWorks is a registered trademark of SolidWorks Corporation. All SPARC trademarks are used under license and are

trademarks or registered trademarks of SPARC International, Inc. in the United States and in other countries. Products

bearing SPARC trademarks are based upon an architecture developed by Sun Microsystems, Inc. STHENO is a trademark

of CAD Schroer GmbH. Sun, Sun Microsystems, the Sun logo, Solaris, UltraSPARC, Java and all Java based marks, and

ÐThe Network is the ComputerÑ are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and

in other countries. VisTools is a trademark of Visual Kinematics, Inc. (VKI). VisualCaf is a trademark of WebGain, Inc.

WebEx is a trademark of WebEx Communications, Inc. Microsoft, Windows, Windows NT, Visual Basic, and the

Visual Basic logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Licensed Third-Party Technology Information

Certain PTC software products contain licensed third-party technology: Rational Rose 2000E is copyrighted software of

Rational Software Corporation. RetrievalWare is copyrighted software of Convera Corporation. VisualCaf is copyrighted

software of WebGain, Inc. VisTools library is copyrighted software of Visual Kinematics, Inc. (VKI) containing confidential

trade secret information belonging to VKI. HOOPS graphics system is a proprietary software product of, and is copyrighted

by, Tech Soft America, Inc. G-POST is copyrighted software and a registered trademark of Intercim. VERICUT is

copyrighted software and a registered trademark of CGTech. Pro/PLASTIC ADVISOR is powered by Moldflow technology.

Moldflow is a registered trademark of Moldflow Corporation. The JPEG image output in the Pro/Web.Publish module is

based in part on the work of the independent JPEG Group. DFORMD.DLL is copyrighted software from Compaq Computer

Corporation and may not be distributed. METIS, developed by George Karypis and Vipin Kumar at the University of

Minnesota, can be researched at http://www.cs.umn.edu/~karypis/metis . METIS is ¨ 1997 Regents of the University of

Minnesota. LightWork Libraries are copyrighted by LightWork Design 1990Î2001. Visual Basic for Applications and Internet

Explorer is copyrighted software of Microsoft Corporation. Adobe Acrobat Reader is copyrighted software of Adobe

Systems. Parasolid ¨ Electronic Data Systems (EDS). Windchill Info*Engine Server contains IBM XML Parser for Java

Edition and the IBM Lotus XSL Edition. Pop-up calendar components Copyright ¨ 1998 Netscape Communications

Technomatix Technologies Ltd. Apache Server, Tomcat, Xalan, and Xerces are technologies developed by, and are

copyrighted software of, the Apache Software Foundation ( http://www.apache.org/ ) Î their use is subject to the terms and

and WITHOUT WARRANTY OF ANY KIND. For the complete Info-ZIP license see

ftp://ftp.info-zip.org/pub/infozip/license.html . Gecko and Mozilla components are subject to the Mozilla Public License

Version 1.1 at http://www.mozilla.org/MPL /. Software distributed under the MPL is distributed on an "AS IS" basis,

WITHOUT WARRANTY OF ANY KIND, either express or implied. See the MPL for the specific language governing rights

and limitations. Technology "Powered by Groove" is provided by Groove Networks, Inc. Technology "Powered by WebEx" is

provided by WebEx Communications, Inc. Acrobat Reader is Copyright ¨ 1998 Adobe Systems Inc. Oracle 8i run-time,

TimedOutException.java), Copyright ¨ 1996, 97 Mattias L. Jugel, Marcus Mei¦ner, is redistributed under the GNU General

Public License. This license is from the original copyright holder and the Applet is provided WITHOUT WARRANTY OF

ANY KIND. You may obtain a copy of the source code for the Applet at http://www.mud.de/se/jta (for a charge of no more

than the cost of physically performing the source distribution), by sending an e-mail to leo@mud.de or marcus@mud.de Ï

you are allowed to choose either distribution method. The source code is likewise provided under the GNU General Public

License . GTK+The GIMP Toolkit are licensed under the GNU LPGL . You may obtain a copy of the source code at

http://www.gtk.org/ , which is likewise provided under the GNU LPGL .

UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND

This document and the software described herein are Commercial Computer Documentation and Software, pursuant to

FAR 12.212(a)-(b) (OCTÓ95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUNÓ95), is provided to the US Government

under a limited commercial license only. For procurements predating the above clauses, use, duplication, or disclosure by

the Government is subject to the restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and

Computer Software Clause at DFARS 252.227-7013 (OCTÓ88) or Commercial Computer Software-Restricted Rights at

FAR 52.227-19(c)(1)-(2) (JUNÓ87), as applicable. 110102

Parametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494 USA

PRINTING HISTORY

Document No.

Date

Description

T993-330-01

07/23/03

Initial Printing of Advanced Design and Analysis with Pro/ENGINEER Wildfire

Order Number T-993-330-EN

Printed in the U.S.A

PTC Telephone and Fax Numbers

Education Services Registration in North America

Tel:

(888) 782-3773

Fax:

(781) 370-5553

Technical Support (Monday - Friday)

Tel:

(800) 477-6435 (U.S.)

(781) 370-5332 or (781) 370-5523 (outside U.S.)

Fax:

(781) 370-5650

License Management

Tel:

(800) 216-8945 (U.S.)

(781) 370-5559 (outside U.S.)

Fax:

(781) 370-5795

Contracts

Tel:

(800) 791-9966 (U.S.)

(781) 370-5700 (outside U.S.)

In addition, you can access the PTC Web site at www.ptc.com . Our Web site contains

the latest training schedules, registration information, directions to training facilities, and

course descriptions. You can also find general information about PTC, Pro/ENGINEER,

Consulting Services, Customer Support, and Pro/PARTNERS.

Precision Learning

THE PRECISION LEARNING METHODOLOGY

PTC Global Services is dedicated to continually providing the student with an

effective, comprehensive learning experience. Toward this goal, PTC developed

Precision Learning, which matches the right training to the right people at the right

time using the right method .

Precision Learning is based on a three-stage, LearnÏAssessÏImprove

methodology.

Stage 1: LEARN

The student attends a PTC training course, including any:

Instructor-led training course (ILT) at a PTC training center.

On-site training course.

Customized training course.

Web-based training (WBT) course.

Stage 2: ASSESS

The impact of a training course is assessed using Pro/FICIENCY. Pro/FICIENCY is a

Web-based skills assessment and development-planning tool. It is designed to deliver

information that will help improve the skills and productivity of the student.

Stage 3: IMPROVE

Pro/FICIENCY enables customers to identify areas for improvement. The training

wizard will direct customers to the appropriate class based on their job responsibilities.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: