Bench Seat 1.pdf

Free Bench Plans - How To Build A Bench

http://www.wayneofthewoods.com/Bench.html

Free Bench Plans - How To Build A Bench

Tools | Building Plans | Wood Finishing | Hardware

Free Bench Seat Plan

Check Out The Bench Plans Below!

Build the Wooden Bench shown on the right with just a few tools using scraps laying around

your shop!

Click on image for larger

view

Rod's Woodworking Corner

Building a wood bench is a project that can be fun and practical. This simple, but sturdy bench can comfortably

seat three adults and will provide years of service. You can build it practically for free with the materials laying

around a building site or your workshop; I used some 2x4's left over from a building project plus some 1x12

boards that I purchased. The required 6-foot pieces will fit in the back of a small hatchback car!

Material List:

(3) 6-foot 2 x 4's for the bench frame.

(1) 6-foot 1 x 6's for the four bench leg braces.

(1) 6-foot 1 x 12 for the Bench Top.

(1) 3/4" plywood and matching edging material, or hardwood (not pine as it will shrink and twist) 4' x 4' for the

Bench Sides.

(1) 1/4" plywood 2' x 8' for the bench top nailers.

Eight framing spikes to build the bench support box. 2" nails to nail the bench 1/4" plywood lids.

1", 2" and, 3" screws - about a 1/2 pound of each.

1 of 6

05/05/2007 1:57 PM

Free Bench Plans - How To Build A Bench

http://www.wayneofthewoods.com/Bench.html

Step 1, Cut and Assemble the Bench Base Frame - Select the 2 x 4; cut two pieces @ 47" and two @ 9 1/4";

assemble them with the framing spikes as shown above.

Select the 1/4" plywood; cut a rectangle @ 9 1/4" x 50"; nail it to the frame with 2" nails as shown above.

2 of 6

05/05/2007 1:57 PM

Free Bench Plans - How To Build A Bench

http://www.wayneofthewoods.com/Bench.html

Select 1 x 12; cut 1 piece @ 53" for the bench top board; attach it with 1" screws through the bottom 1/4"

plywood nailer; allow a 3/4" inch overhang on the front and back edges; allow 1 1/2" on each end as shown

below.

Northern Tool Free Shipping on orders $150 or more

3 of 6

05/05/2007 1:57 PM

Free Bench Plans - How To Build A Bench

http://www.wayneofthewoods.com/Bench.html

Step 2, Cut and Assemble the End Panels - Select 3/4" plywood; cut two rectangles @ 11" x 17 1/4" for the

bench end panels; attach each end with one 2" screw into the 2x4 brace as shown above.

Select 3/4" plywood or 1 x 12 pine; cut four right triangles @ 8" sides for the bench end panel braces; attach each

brace with four 2" screws as shown above.

Select 2 x 4; cut it to 50"; measure four inches up from the floor and attach this rail on center between the two

end panels with four 3" screws as shown above.

Repeat the Bench building process until you have built all the benches required.

Use a filler to fill all the screw holes, sand Benches, prime, and paint/stain to suit; attach some felt pads to the

bottom of the Bench Side Panels to protect any floors; now you are ready to sit and eat comfortably on your new

Benches.

4 of 6

05/05/2007 1:57 PM

Free Bench Plans - How To Build A Bench

http://www.wayneofthewoods.com/Bench.html

Here are the finished benches built with plans featured here! Click Here for the Free Trestle Table Plans!

Free Bench Building Plans by: WayneOfTheWoods@yahoo.com

Free Storage Bench Plan Click Here!

More FREE Plans!

Picnic Table Plans

Gun Rack Plans

Bookcase Plans

Bird Feeder

Get This Free Rockler Catalog!

Hard-to-find items & Rockler Exclusive items for the home and the shop!

Table-levelers, custom blades, hardware, and tools - a great resource!

First Name:

Last Name:

Address Line 1:

5 of 6

05/05/2007 1:57 PM

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: