stereoremoval.pdf

(495 KB) Pobierz
466017 - Civic - 93-95 - Radio Install
Civic
TM
1993
thru 1995
www.installdr.com
Honda
I
Radio Replacement
Document #: 466017
Cover
Page
Before
You Begin
Remove
& Install
Wire
New Radio
Mount
New Radio
Click on a link
tab to jump to
that page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized In Writing By The Install Doctor Is Prohibited. Protected By U.S. Copyright Laws. © 1997,1998,1999,2000.
Factory Radio
Other Documents Available For This Vehicle:
No documents available at this time
New Radio
Adobe Acrobat Reader Printing Tips :
1) Select “FILE” then “PRINT” and select your printer.
2) In the print options box do the following:
A ) Locate check box “Shrink to Fit” . Place check in box.
B ) Locate box “Print Quality” . Select highest print dpi
allowed by printer.
C ) If print quality listed is not as high as that printers normal
quality, press the “SETUP..” button. In the next screen,
press the “PROPERTIES” button and set the printers
print quality to the highest print dpi allowed.
Document Revision History
12/99
Document Creation
All Information, Including Photos And Illustrations, In These Pages Is Believed To Be Correct And Reliable. The Information Contained In These Pages Is Given As General Information For The Installation Of Audio, Video, Security,
Communications, And Other Accessory Products Into Mobile And/Or Vehicle Applications. The Install Doctor, Any Subsidiaries Or Divisions Thereof, Or Any Member Of These Companies Shall Not Be Held Liable For Any Damages And/Or Injuries
Resulting From The Use Of Information Contained In These Pages. All Information Contained In These Pages Should Be Checked And Verified With Appropriate Test Equipment To Assure The Safety And Proper Operation Of Equipment Installed
And The Vehicle Itself. Careful Attention Should Be Given To All Electronic/Electric Circuits. High Voltages And Currents Can Cause Bodily Injury, Skin Damage, And Even Death. Installs Are Taken At The Risk Of Each Installer, And/Or Individual.
227981927.012.png
Civic
TM
1993
thru 1995
www.installdr.com
Honda
I
Radio Replacement
Document #: 466017
Cover
Page
Before
You Begin
Remove
& Install
Wire
New Radio
Mount
New Radio
Click on a link
tab to jump to
that page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized In Writing By The Install Doctor Is Prohibited. Protected By U.S. Copyright Laws. © 1997,1998,1999,2000.
Overview Of This Radio Install
Parts Needed For This Radio Install
Step
What Section To Go To
Parts REQUIRED for the install
Description
Remove old radio from dash
Remove & Install
Snap on in dash wire harness
Honda 86 and newer harness
Wire the new radio
Wire New Radio
Mount the new radio
Mount New Radio
Finishing the installation
Remove & Install
Optional parts for this install
None
Tools Needed To Complete This Install
TOOL TIPS:
#2
Phillips
8 mm
Socket
Solder/
Crimper
Voltage
Meter
Small
Battery
Small Battery : use a battery to test speaker wires. Touching the (+) positive
and (-) negative baterry leads to a pair of speaker will cause the speaker to
make a “Pop” sound indicating that pair of wires goes to that speaker.
Voltage Meter : Always check +12 Volt power wires for voltage before
making wire connections. These wires will fluctuate between 10 and 14 Volts.
Solder Iron or Crimp Tool : make wire to wire connections using either a
solder iron and electrical tape, OR plastic crimp terminals found at most
hardware or auto parts stores.
Hand tools needed
to remove radio
Accessory tools needed to test and
wire the new radio
PLUS: Wire ties or electrical tape : to neatly bundle and organize your
wires for a professional appearance.
Installation Difficulty Ratings
Easy . No advanced skills or specialty tools needed.
Basics . Simple tools required. Installs quickly.
Intermediate . Requires knowledge of tools, or disassembly of panels.
Advanced . Requires advanced tools, or extra time.
Difficult . Involves modifying or cutting of the installation area. Advanced
tools and/or skills required. Best if performed by experienced installers.
Do It Yourselfers
Basics
Professional Installer
Basics
Support Information If You Need Help
Supplemental information if you need help
Document Title
Document #
Basic DC electronics for automotive applications
999001
Wire splicing: soldering vs. crimping
999004
Why use radio installation kits
999005
Mounting your radio to an installation kit
999007
Why use an optional snap on wire harness
999008
Wiring your new radio using a wire harness
999009
Testing wires when installing a new radio
999013
All Information, Including Photos And Illustrations, In These Pages Is Believed To Be Correct And Reliable. The Information Contained In These Pages Is Given As General Information For The Installation Of Audio, Video, Security,
Communications, And Other Accessory Products Into Mobile And/Or Vehicle Applications. The Install Doctor, Any Subsidiaries Or Divisions Thereof, Or Any Member Of These Companies Shall Not Be Held Liable For Any Damages And/Or Injuries
Resulting From The Use Of Information Contained In These Pages. All Information Contained In These Pages Should Be Checked And Verified With Appropriate Test Equipment To Assure The Safety And Proper Operation Of Equipment Installed
And The Vehicle Itself. Careful Attention Should Be Given To All Electronic/Electric Circuits. High Voltages And Currents Can Cause Bodily Injury, Skin Damage, And Even Death. Installs Are Taken At The Risk Of Each Installer, And/Or Individual.
227981927.013.png 227981927.014.png 227981927.015.png
Civic
TM
1993
thru 1995
www.installdr.com
Honda
I
Radio Replacement
Document #: 466017
Cover
Page
Before
You Begin
Remove
& Install
Wire
New Radio
Mount
New Radio
Click on a link
tab to jump to
that page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized In Writing By The Install Doctor Is Prohibited. Protected By U.S. Copyright Laws. © 1997,1998,1999,2000.
Remove Factory Radio
STEP 1 :
STEP 2 :
Removing the radio in this vehicle requires
removing lower dash panel directly below
the radio. To remove the Honda factory
radio, (2) two screws at the rear of the
radio must be removed from underneath the
radio which cab be accessed once the
lower dash panel has been removed.
To remove the lower dash panel locate and remove (2) phillips screws at the top, and (2)
phillips screws , (1) on each side of the lower dash panel below the radio.
Once the screws are removed, pull the dash panel away from the body of the dash. Unplug
the connector attached to the rear of the cigarette lighter.
STEP 3 :
STEP 4 :
Once the lower dash panel is removed,
LOOK UP under the dash to the bottom of the
radio.
Pull the radio out of the dash. Unplug the
black cable plugged into the rear of the radio.
Unplug the white plastic wire harness
connector plugged into the rear of the radio.
You will see the (2) phillips screws / 8mm
bolts that secure the rear of the radio.
Remove both screws.
All Information, Including Photos And Illustrations, In These Pages Is Believed To Be Correct And Reliable. The Information Contained In These Pages Is Given As General Information For The Installation Of Audio, Video, Security,
Communications, And Other Accessory Products Into Mobile And/Or Vehicle Applications. The Install Doctor, Any Subsidiaries Or Divisions Thereof, Or Any Member Of These Companies Shall Not Be Held Liable For Any Damages And/Or Injuries
Resulting From The Use Of Information Contained In These Pages. All Information Contained In These Pages Should Be Checked And Verified With Appropriate Test Equipment To Assure The Safety And Proper Operation Of Equipment Installed
And The Vehicle Itself. Careful Attention Should Be Given To All Electronic/Electric Circuits. High Voltages And Currents Can Cause Bodily Injury, Skin Damage, And Even Death. Installs Are Taken At The Risk Of Each Installer, And/Or Individual.
227981927.001.png 227981927.002.png 227981927.003.png
Civic
TM
1993
thru 1995
www.installdr.com
Honda
I
Radio Replacement
Document #: 466017
Cover
Page
Before
You Begin
Remove
& Install
Wire
New Radio
Mount
New Radio
Click on a link
tab to jump to
that page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized In Writing By The Install Doctor Is Prohibited. Protected By U.S. Copyright Laws. © 1997,1998,1999,2000.
Wiring The New Radio
Mounting The Radio
Move to : Wire New Radio Section
Move to: Mounting New Radio Section
Completing The Radio Installation
STEP 1 :
STEP 2 :
Slide the new radios installation or mounting
sleeve into the dash.
Insert the new radio into the dash. Plug the black antenna cable into the rear of the new radio.
Make sure all wire connections for the new radio have been completed and plug in any connectors
for the new radio now. Slide the new radio into the radio installation or mounting sleeve.
This step is shown in more detail in the
“Mount New Radio” section.
The Installation Is Now Complete
All Information, Including Photos And Illustrations, In These Pages Is Believed To Be Correct And Reliable. The Information Contained In These Pages Is Given As General Information For The Installation Of Audio, Video, Security,
Communications, And Other Accessory Products Into Mobile And/Or Vehicle Applications. The Install Doctor, Any Subsidiaries Or Divisions Thereof, Or Any Member Of These Companies Shall Not Be Held Liable For Any Damages And/Or Injuries
Resulting From The Use Of Information Contained In These Pages. All Information Contained In These Pages Should Be Checked And Verified With Appropriate Test Equipment To Assure The Safety And Proper Operation Of Equipment Installed
And The Vehicle Itself. Careful Attention Should Be Given To All Electronic/Electric Circuits. High Voltages And Currents Can Cause Bodily Injury, Skin Damage, And Even Death. Installs Are Taken At The Risk Of Each Installer, And/Or Individual.
227981927.004.png 227981927.005.png 227981927.006.png
Civic
TM
1993
thru 1995
www.installdr.com
Honda
I
Radio Replacement
Document #: 466017
Cover
Page
Before
You Begin
Remove
& Install
Wire
New Radio
Mount
New Radio
Click on a link
tab to jump to
that page
Publication, Duplication, or Retransmission Of This Document Not Expressly Authorized In Writing By The Install Doctor Is Prohibited. Protected By U.S. Copyright Laws. © 1997,1998,1999,2000.
Step By Step Wiring
Page 1 of 2
Auto Makers
Factory
Radio
New Radio
Wire Harness Inside Vehicles
Dash Which Plugs Into The
Rear Of The Factory Radio
Optional (STRONGLY
RECOMMENDED) Snap On Wire
Harness That Splices Into The
Wires Of The New Radio
(Note: the radio shown is for display purposes and may not be similar in
size or dimensions than the auto makers factory radio in your vehicle )
Wiring Instructions:
The power and speaker wires needed to connect the new radio are attached to
the connector of the wire harness located inside the vehicles dash. The Install
Doctor STRONGLY recommends using an optional snap on wire harness that is
specifically designed to snap into the vehicles dash wire harness connector.
This will keep you from cutting the vehicles wires. This optional snap on wire
harness will have wires on the opposite side of the connector that will allow you
to splice these wires to the new radios wires. The only other option is to cut off
the vehicles dash wire harness connector and splice the new radios wires
directly to these wires. The optional snap on wire harness takes all the guess
work out of trying to figure out what each wire is in the vehicles dash wire
harness. The optional snap on wire harness shows you what each wire is.
Supplemental information if you need help
Document Title Document #
Testing wires when installing a new radio 999013
Why use an OEM snap on wire harness 999008
Wiring your new radio using a wire harness 999009
Wire splicing: soldering vs. crimping
999004
STEP 1
Ground Wire
Connect the GROUND w ire of the new radio to the ground wire of a
snap on wire harness OR crimp a ring terminal connector to this wire
and screw the ring terminal to metal inside the vehicles dash.
Ground Wire
STEP 2
+12 Volt
Battery Wire
Connect the +12 V o lt Battery or Constant wire of the new radio to
either the +12 Volt Battery wire of a snap on wire harness OR connect
this wire to the +12 Volt Battery wire found in the wire chart above.
+12 Volt
Battery Wire
STEP 3
+12 Volt
Ignition Wire
Connect the +12 V o lt Ignition or Switch wire of the new radio to
either the +12 Volt Ignition wire of a snap on wire harness OR connect
this wire to the +12 Volt Ignition wire found in the wire chart above.
+12 Volt
Ignition Wire
STEP 4
Power Antenna
Wire (if available)
If your vehicle has a POWER ANTENNA connect the
POWER ANTENNA wire of the new radio to either the POWER
ANTENNA wire on a snap on wire harness OR wire in chart above.
Power Antenna
Wire (if available)
STEP 5
Left Front Speaker Wires
Connect the LEFT FRONT speaker wires from the new radio to the
LEFT FRONT speaker wires on a snap on wire harness OR the
LEFT FRONT speaker wires found in the chart above.
Left Front Speaker Wires
STEP 6
Right Front Speaker Wires
Connect the RIGHT FRONT speaker wires from the new radio to the
RIGHT FRONT speaker wires on a snap on wire harness OR the
RIGHT FRONT speaker wires found in the chart above.
Right Front Speaker Wires
STEP 7
Left Rear
Speaker Wires
Connect the LEFT REAR speaker wires from the new radio to the
LEFT REAR speaker wires on a snap on wire harness OR the
LEFT REAR speaker wires found in the chart above.
Left Rear
Speaker Wires
STEP 8
Right Rear Speaker Wires
Connect the RIGHT REAR s peaker wires from the new radio to the
RIGHT REAR speaker wires on a snap on wire harness OR the
RIGHT REAR speaker wires found in the chart above.
Right Rear Speaker Wires
All Information, Including Photos And Illustrations, In These Pages Is Believed To Be Correct And Reliable. The Information Contained In These Pages Is Given As General Information For The Installation Of Audio, Video, Security,
Communications, And Other Accessory Products Into Mobile And/Or Vehicle Applications. The Install Doctor, Any Subsidiaries Or Divisions Thereof, Or Any Member Of These Companies Shall Not Be Held Liable For Any Damages And/Or Injuries
Resulting From The Use Of Information Contained In These Pages. All Information Contained In These Pages Should Be Checked And Verified With Appropriate Test Equipment To Assure The Safety And Proper Operation Of Equipment Installed
And The Vehicle Itself. Careful Attention Should Be Given To All Electronic/Electric Circuits. High Voltages And Currents Can Cause Bodily Injury, Skin Damage, And Even Death. Installs Are Taken At The Risk Of Each Installer, And/Or Individual.
227981927.007.png 227981927.008.png 227981927.009.png 227981927.010.png 227981927.011.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin