DP-1700F_OM_EN-US_0001.pdf

PLAIN PAPER FACSIMILE

Operator's Manual

EPA E NERGY S TAR ®

The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the E NERGY

S TAR Program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance

the workplace, improve product performance, prevent pollution, and reduce your energy costs. As an E NERGY

S TAR Partner, Toshiba has determined that this facsimile model meets the E NERGY S TAR guidelines for

energy efficiency. E NERGY S TAR guidelines require that all E NERGY S TAR facsimiles maintain very

low power consumption during idle state or have a " Power Saver " feature that will automatically stand-down to

an idle state after a period of inactivity.

For more information on the E NERGY S TAR Program, please contact:

E NERGY S TAR Printers/Fax Machines

US EPA (6202J)

Washington, DC 20460

E NERGY S TAR is a U.S. registered mark.

NOTICE TO USERS

Read through this manual before using the machine. Keep the manual in a convenient location so that you may refer to the manual whenever necessary.

U. S. A.

WARNING FCC Notice: Part 15

This terminal has been tested and found to comply with the limits for a Class A digi-

tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is oper-

ated in a commercial environment. This equipment generates, uses, and can radi-

ate radio frequency energy and, if not installed and used in accordance with this

guide, may cause harmful interference to radio communications. Operation of this

terminal in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his/her own expense.

Warning :

quired. But if advance notice isn’t practical, the telephone company will notify the

customer as soon as possible. Also, you will be advised of your right to file a com-

plaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations

or procedures that could affect the operation of the equipment. If this happens the

telephone company will provide advance notice in order for you to make necessary

modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information,

please contact TOSHIBA AMERICA BUSINESS SOLUTIONS, INC. Electronic Im-

aging Division at 1-800-468-6744. If the equipment is causing harm to the telephone

network, the telephone company may request that you disconnect the equipment

until the problem is resolved.

Changes or modification made to this equipment, not expressly ap-

proved by Toshiba TEC or parties authorized by Toshiba TEC could

void the user’s authority to operate the equipment.

WARNING FCC Notice: Part 68

This equipment complies with Part 68 of the FCC rules and the requirements

adopted by the ACTA. On the rear of this equipment is a label that contains, among

other information, a product identifier in the format US: AAAEQ##TXXXX. If re-

quested, this number must be provided to the telephone company.

Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation commission for infor-

mation.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person

to use a computer or other electronic device, including Fax machines, to send any

message unless such message clearly contains in a margin at the top or bottom of

each transmitted page or on the first page of the transmission, the date and time it

is sent and an identification of the business or other entity, or other individual send-

ing the message and the telephone number of the sending machine or such busi-

ness, other entity, or individual.

(The telephone number provided may not be a 900 number or any other number for

which charges exceed local or long-distance transmission charges.)

This device is equipped with a USOC RJ11C connector.

A plug and jack used to connect this equipment to the premises wiring and tele-

phone network must comply with the applicable FCC Part 68 rules and requirements

adopted by the ACTA. A compliant telephone cord and modular plug is provided

with this product. It is designed to be connected to a compatible modular jack that

is also compliant. See installation instructions for details.

In order to program this information into your Fax machine, you should complete:

complete the setup procedures listed for station ID number and name on page 43 in

this manual.

The REN is used to determine the number of devices that may be connected to a

telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of RENs

should not exceed five (5.0). To be certain of the number of devices that may be

connected to a line, as determined by the total RENs, contact the local telephone

company. For products approved after July 23, 2001, the REN for this product is

part of the product identifier that has the format US: AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately shown on the label.

CAUTION -

To reduce the risk of fire, use only No. 26 AWG or larger telecommuni-

cation line cord.

TOSHIBA AMERICA BUSINESS SOLUTIONS, INC.

Electronic Imaging Division

2 Musick, Irvine, CA 92618-1631

If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be re-

This equipment is hearing aid compatible.

Canada

NOTICE: The Industry Canada label identifies certified equipment. This certifica-

tion means that the equipment meets telecommunications network protective, operational

and safety requirements as prescribed in the appropriate Terminal Equipment Technical

Requirements document(s). The Department does not guarantee the equipment will oper-

ate to the user’s satisfaction.

Le Ministére n’assure toutefois pas que le matériel fonctionnera à la satisfaction de

l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder aux

installations de l’entreprise locale de télécommunication. Le matériel doit également être

installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier

qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines situations.

Before installing this equipment, users should ensure that it is permissible to be con-

nected to the facilities of the local telecommunications company. The equipment must

also be installed using an acceptable method of connection. The customer should be

aware that compliance with the above conditions may not prevent degradation of service

in some situations.

Les réparations de materiel homologué doivent être coordonnées par un représentant

désigné par le fournisseur. L’entreprise de télécommunications peut demander à

l’utilisateur de débrancher un appareil à la suite de réparations ou de modifications

effectuees par l’utilisateur ou à cause de mauvais fonctionnement.

Repairs to certified equipment should be coordinated by a representative designated by

the supplier.

Any repairs or alterations made by the user to this equipment, or equipment malfunctions,

may give the telecommunications company cause to request the user to disconnect the

equipment.

Pour sa propre protection, l’utilisateur doit s’assurer que tous les fils de mise à la terre de

la source d’énergie électrique, des lignes téléphoniques et des canalisations d’eau

métalliques, s’il y en a, sont raccordés ensemble. Cette précaution est particulièrement

importante dans les régions rerales.

Users should ensure for their own protection that the electrical ground connections of the

power utility, telephone lines and internal metallic water pipe system, if present, are con-

nected together. This precaution may be particularly important in rural areas.

Avertissement: L’utilisateur ne doit pas tenter de faire ces raccordements luimême; il

doit avoir recours à un service d’inspection des installations électriques, ou à un

électricien, selon le cas.

CAUTION: Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or electrician, as appropriate.

L’indice d’equivalence de la sonnerie de ce matériel 0.3.

AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à chaque dispositif terminal

indique le nombre maximal de terminaux qui peuvent être raccordés à une interface. La

terminaison d’une interface téléphonique peut consister en une combinaison de

quelques dispositifs, à la seule condition que la somme d’indices d’equivalence de la

sonnerie de tous les dispositifs n’excède pas 5.

The Ringer Equivalence Number of your facsimile is 0.3

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal de-

vice provides an indication of the maximum number of terminals allowed to be connected

to a telephone interface. The termination on an interface may consist of any combination

of devices subject only to the requirement that the sum of the Ringer Equivalence Num-

bers of all the devices does not exceed 5.

ATTENTION – Pour réduire les risques d’incendie, utiliser uniquement des conducteurs

de telecommunications 26 AWG au de section superleure.

CAUTION – To reduce the risk of fire, use only No.26 AWG or larger telecommunication

line cord.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

AVIS: L’etiquette d’lndustrie Canada identifie le marériel homologué. Cette étiquette

certifie que le matériel est conforme aux normes de protection, d’exploitation et de

sécurité des réseaux de télécommunications, comme le prescrivent les documents

concernant les exigences techniques relatives au matériel terminal.

TOSHIBA OF CANADA LIMITED

Office Product Group

191 McNABB STREET

MARKHAM, ONTARIO L3R 8H2

LASER SAFETY INFORMATION

This facsimile does not produce laser radiation hazardous to the user. It is certified

as a Class 1 laser product under the U.S Department of Health and Human Ser-

vices (DHHS) Radiation Performance Standard according to the Radiation Control

for Health and Safety Act of 1968.

Protective housing and external covers completely confine the laser light emitted

inside the facsimile. The laser beam cannot escape from the machine during any

phase of user operation.

Regulations implemented on August 2, 1976 by the Bureau of Radiological Health

(BRH) of the U.S Food and Drug Administration apply to laser products manufac-

tured from August 1,1976. Laser products marketed in the United States must com-

ply with these regulations.

4122-1496

Caution:

Using controls or adjustments or performing procedures, other

than those specified herein may result in hazardous radiation ex-

posure.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: