Woodsmith #177 5-tier-display-tower-pattern.pdf
(
225 KB
)
Pobierz
Online Extra
5 -Tier Display Tower
Pattern
Making the cutout handles on the front of
each drawer in the 5-tier display tower is
a snap using the pattern on this page.
After the shelf fronts are made and the
locking rabbet joinery is cut, all you’ll
need to do is make a hardboard template
from the full-size pattern printed below.
Then just lay the template in the upper
corner of each shelf front. Using the hard-
board template will ensure that each cut-
out is exactly the same. The extra thick-
ness will make it easier to hold it steady.
Then just trace around the curve for the
correct radius. As you can see from the
drawing below, the pattern is shorter than
the bottom shelf front, but it is an exact
full-sized pattern for the top shelf. Just lay
it in each front’s upper corners.
Once you have the cutouts on the shelf
fronts laid out, you can take them over to
the band saw to cut them. You can clean
up any blade mark with a sanding drum
on the drill press. Then you can smooth
the straight sections
of the cut edge with
a sanding block or file.
The final step is to assemble the shelves
and install
t
hem in the shelf unit.
W
{
C
utouts on the front of each shelf create the look of working drawers on
this display tower. The open design allows for easy access.
Align with top
edge of
shelf front
Place template
in corner of shelf
front to trace curve
Carpet
tape
FULL-SIZE
PATTERN
Align with
ends of
shelf front
NOTE:
Copy and transfer pattern
to hardboard to make template
Woodsmith No.177 Online Extras
©2008 August Home Publishing. All rights reser ved.
Plik z chomika:
klewier
Inne pliki z tego folderu:
Woodsmith #126 bookend-scroll-patterns.pdf
(23 KB)
Woodsmith #126 jewelry-box-scroll-patterns.pdf
(225 KB)
Woodsmith #134 glue-application-chart.pdf
(19 KB)
Woodsmith #135 coffee-table-leg-pattern.pdf
(35 KB)
Woodsmith #135 sofa-table.pdf
(94 KB)
Inne foldery tego chomika:
Project Plans & Tips
Zgłoś jeśli
naruszono regulamin