======================================================================== *** Basic Information *** ======================================================================== [Create date] 2008/01/30 ------------------------------------------------------------------------ [Program Name] BICU_IC ------------------------------------------------------------------------ [Version] B032M028 ------------------------------------------------------------------------ [PCB No.] B2625101M, B2625103J, B2845101K, B2845103G ------------------------------------------------------------------------ [Interchangeability] X / O ------------------------------------------------------------------------ [Other Firmware Requirements] None ------------------------------------------------------------------------ [PCB Requirements] None ------------------------------------------------------------------------ [Software category] Normal Release ------------------------------------------------------------------------ [Release category] Normal Release ------------------------------------------------------------------------ [Program category] ------------------------------------------------------------------------ Exported to(language) ASI(gb,tc) [Firmware No.] B2625533C-B2625540E [File Information] File Name B2625533C-B2625540E.bin File Type Module for Service Size 2.00 MB ( 2097152 byte ) Check Sum -8Bit Sum: EBB5 -16Bit Sum(Little Endian): AB68 -16Bit Sum(Big Endian): F54D ------------------------------------------------------------------------ Exported to(language) USA_EUR(en,gb,f,e,d,i,nl,s,n,dk,sf,p,pl,h,cz,ru) [Firmware No.] B2625531F-B2625540E [File Information] File Name B2625531F-B2625540E.bin File Type Module for Service Size 2.00 MB ( 2097152 byte ) Check Sum -8Bit Sum: B033 -16Bit Sum(Little Endian): EED0 -16Bit Sum(Big Endian): F463 ------------------------------------------------------------------------ [Production reflection] 2008/03 ------------------------------------------------------------------------ ======================================================================== *** Note *** ======================================================================== [Note] ------------------------------------------------------------------------ ======================================================================== *** Important Notes *** ======================================================================== [Important Notes] ------------------------------------------------------------------------ ======================================================================== *** Modification History *** ======================================================================== [Modifications made:] Error correction: "Replace Photoconductor" alarm does not work on the S-C3 Fax and Printer/Scanner/Fax models. ------------------------------------------------------------------------ [Modification history] ---------------------------------------- Version B032M027 Basic Model only: 1.If a DF jam occurs when the counting timing for the optional key card is set to "At paper exit", the blank page that is printed out is then counted. 2.An OHP sheet fed from the bypass tray is counted as thick paper when printing from the GDI controller. Basic and MFP model: 3.White spots appear on the image. ---------------------------------------- Version B031M026 Ver.0.26: 1)One page was not counted on the key counter when in odd pages duplex printing. 2)Duplex printing was not control properly when the decrement key card was connected on the machine. 3)Word data correction for the multiple languages. 4)Part of the trailing edge was not printed on over 420mm length copy using the by-pass feed table when the machine starts from the sleep mode. Ver.0.31: 1)One page was not counted on the key counter when in odd pages duplex printing. 2)Duplex printing was not control properly when the decrement key card was connected on the machine. 3)Word data correction for the multiple languages. ---------------------------------------- Version B028M025 1st Mass production. ---------------------------------------- Version B027M013 Symptom corrected: The machine stops scanning the original under the following conditions: - The originals are scanned in the DF using reduction - Many originals are scanned in simplex mode Other changes: Changed the registration adjustment range for the DF main-scan ---------------------------------------- Version B026M013 For 1st Mass production.
d.byczek