Technical Bulletin PAGE: 2/2Reissued: 30-Jan-08
Model: Stella-C3
Date: 23-Aug-06
No.: RB262001d
RTB Reissue
The items in bold italics have been added.
Subject:
Prepared by:
From: 1st Tech. Support Sec. Service Support Dept.所属グループ名を選択2nd Tech. Support Sec. Service Support Dept.Technical Services sec. Service Planning Dept.Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ()
This RTB has been issued to announce the firmware release information for the Engine (BICU-IC).
For USA/Europe basic model
Version
Program No.
Effective Date
0.32
B2625531F
Sep/07 production
0.31
B2625531E
Feb/07 Production
0.27
B2625531C
August 2006 production
0.26
B2625531B
1st Mass production.
Modified Points or Symptom Corrected
Basic Model only:
1. If a DF jam occurs when the counting timing for the optional key card is set to "At paper exit", the blank page that is printed out is then counted.
2. An OHP sheet fed from the bypass tray is counted as thick paper when printing from the GDI controller.
Basic and MFP model:
3. White spots appear on the image.
1. One page was not counted on the key counter when in odd pages duplex printing.
2. Duplex printing was not control properly when the decrement key card was connected on the machine.
3. Word data correction for the multiple languages.
Symptom corrected:
The machine stops scanning the original under the following conditions:
- The originals are scanned in the DF using reduction
- Many originals are scanned in simplex mode
Other changes:
Changed the registration adjustment range for the DF main-scan
For 1st Mass production.
For Asia basic model
B2625533C
B2625533B
B2625533A
For Generic MFP model
0.28
B2625540E
Mar/08 production
B2625540D
Sep/07 Production
d.byczek