Disassembly & Reassembly.pdf
(
2145 KB
)
Pobierz
C:\Documents and Settings\최윤선\...
7. Disassembly and Assembly Instructions
7-1. Disassembly
1
1) Unscrew 6 bolts.
2
1)
Unlock the lockers forcibly following the
directions below.
1
2
3
4
5
1) Be careful not to make any scratch or damage on the
exterior.
1) Be careful not to make any scratch or damage on the
exterior.
3
1)
Unscrew 2 bolts.
4
1) Disassemble the pba assembly.
push down this point using tool.
1) Be careful not to make any damage to the pba
1) Be careful not to make any damage to the pba
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
1)
Separate LCD connector from the pba
2) Separate volume key pcb from the pba
3) Separate inntena connector from the pba
6
1) Separate camera from the brakect
2)
turn over the pba
3)
Separate key connector from the pba
pull up this point using tool.
1
2
3
1) Be careful not to make any damage to the pba
1) Be careful not to make any damage to the pba
2) Be careful not to make any damage to the camera
7
1) Detach window from the pba
8
1)
Detach LCD from the brakect.
pull up this point using tool.
push down this point using tool.
1) Separate slowly with no damage to the window and LCD.
1) Separate slowly with no damage to the LCD.
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
7-2. Assembly
1
1)
Assemble LCD to the brakect
2
1) Attach the window to the LCD.
insert LCD connector into the brakect hole
1) Check dust and dirt on the LCD.
2) Be careful not to make any damage to the LCD.
1) Check dust and dirt on the LCD and window.
3
1) Connect the key connector.
2)
Turn over the pba.
4
1)
Screw 2 bolts.
1) Check completely connected.
1) Be careful not to make any damage to the pba
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
1) Connect LCD connector to the pba
2) Connect inntena wire to the pba
3) Attach volume key pcb to the braket
6
1)
Attach camera to the braket
1
2
3
1) Check completely connected.
2) Be careful not to make any damage to the pba
2) Be careful not to make any damage to the camera.
7
1) Assemble the key pad with front.
8
1) Assemble the pba with front.
insert pba into the right's hook
1)
Be careful not to make any scratch or damage on the
exterior.
1)
Be careful not to move the key pad
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9
1) Assemble the pba with front.
10
1) Assemble the volume key pad with front.
2) Assemble the camera key pad with front.
1
insert pba into the left's hook using tool.
2
1)
Be careful not to move the key pad
1)
Be careful not to move the key pad
11
1) Assemble the rear with front.
12
1) Screw 6 bolts.
HOOK POINT
1)
Be careful not to make any scratch or damage on the
exterior.
1)
Be careful not to make any scratch or damage on the
exterior.
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Plik z chomika:
misiekyo
Inne pliki z tego folderu:
Troubleshooting.pdf
(1980 KB)
Reference Information.pdf
(55 KB)
Product Specification.pdf
(171 KB)
Precaution.pdf
(76 KB)
PCB Diagram.pdf
(1498 KB)
Inne foldery tego chomika:
_E2P, Eeprom
2100
470
600
800
Zgłoś jeśli
naruszono regulamin