LFS S1 Autocross Editor Instruction Manual ========================================== (Full S1 version only) The autocross editor is accessed by pressing SHIFT+U inside the game. In there you can save, load and edit layouts, when you turn on the "place objects" button. All the editor keys are listed on that screen. The autocross system works over the internet as well, the host can edit / load a layout while guests are connected. To make an autocross layout, you place objects and checkpoints and a start point. If you don't place a start point, then it will use the default start grid and will behave like a normal race track. In that case there will be no time penalties but you will need to place check points so that laps are timed. Placing objects : select an object type and place an object by pressing O. you can adjust the direction (heading) of the object by using the < and > keys. If you press M with an object selected, it will move that object to the mouse position, and update it with the heading that you have set. Placing checkpoints : you need one finish line and at least one checkpoint, in effect this defines the circuit, and also gives you split times at those points. Pressing F or 1, 2, 3 gives you a finish line or a checkpoint. You can adjust their direction and width in the same way as you do for objects. Checkpoints are invisible when driving - it is up to the person who edits the track to make sure the user drives through them, by using cones or other objects. The W and E keys can be used to change the width of a checkpoint. NOTE : direction is important with checkpoints, you must drive over it in the correct direction or no split time or lap will be recorded. A checkpoint looks like a square bracket, and you must drive FROM the side with the "ends" of the square bracket and over TO the "flat side" of the square bracket. View control - the keys are listed on screen. Press V to toggle between high and low view. Viewing the track - press SPACE to turn on or off all the editor buttons so you can see the track clearly. Distance measurement : Press D to activate the measuring tool. LFS - 8 April 2004
mitrix17