Choinkowa Ozdoba 1.pdf

(4305 KB) Pobierz

Tree-Ornamentpg1

Mickey and Minnie Ornament

© Disney

Page 1 of 3

296766266.048.png

296766266.049.png

296766266.050.png

296766266.051.png

296766266.001.png

296766266.002.png

296766266.003.png

296766266.004.png

296766266.005.png

296766266.006.png

296766266.007.png

296766266.008.png

296766266.009.png

296766266.010.png

296766266.011.png

296766266.012.png

296766266.013.png

296766266.014.png

296766266.015.png

296766266.016.png

296766266.017.png

296766266.018.png

296766266.019.png

296766266.020.png

296766266.021.png

296766266.022.png

296766266.023.png

296766266.024.png

296766266.025.png

296766266.026.png

Mickey and Minnie Ornament: Instructions

Craft Materials: Scissors, Ribbon or string at least 9 inches long, glue, and tape or stapler

Step 1. Print out the ornament on regular paper or use card stock

for a sturdier ornament. Cut out all three Mickey pieces. (All three

pieces make one ornament.)

Step 2. Fold each piece in half so the white side is facing out.

Re-open the pieces and place them picture side down on a

table or flat surface.

Step 3. Cut a piece of ribbon or string about 9 inches long. Fold the

string in half and tape or staple it together at the ends.

Step 4. Cover the left side of the first ornament piece (pieces

can be used in any order) with glue. Place the end of the

ribbon or string into the glue as close to the center of the

ornament as possible and press down firmly.

© Disney

Page 2 of 3

296766266.027.png

296766266.028.png

296766266.029.png

296766266.030.png

296766266.031.png

296766266.032.png

296766266.033.png

296766266.034.png

296766266.035.png

296766266.036.png

296766266.037.png

Mickey and Minnie Ornament: Instructions

Step 5. Place the second ornament piece (picture side up) on top of the

ornament piece that has the layer of glue. Make sure the pieces line up

so the ribbon is stuck between the two pieces. Fold back the aps that

are not glued together.

Step 6. Spread glue onto the remaining white aps of the ornament.

Press the last piece of the ornament into the glue. Make sure the

edges line up. Your ornament is nished!

© Disney

Page 3 of 3

296766266.038.png

296766266.039.png

296766266.040.png

296766266.041.png

296766266.042.png

296766266.043.png

296766266.044.png

296766266.045.png

296766266.046.png

296766266.047.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin