AUDI A6 2003 Benzin.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

AUDI

A6*

YEAR 03 ﬁ

PETROL

DIESEL

MAKE

MOD.

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, driver’s side.

CENTRAL UNIT POSITION

Position the modular systems and the modules on the left of the steering column, driver’s

side.

POWER SUPPLY

+30: connect with a ring terminal to one of the general power supply terminal in the fuse box.

- 31: connect with a ring terminal directly to the car body.

IGNITION WIRE

+15/54: connect to the 1,5 mm 2 BLUE/BLACK, wire at the position nr.4, of the orange

connector nr.15 located on the connectors holder plate behind the left bulkhead, driver’s side.

DIRECTION INDICATORS

Connect to the BLACK/WHITE wires at the position nr.9 and BLACK/GREEN wires at the

position nr.10, in the 10 way light brown connector, located behind the left sill cover, driver’s

side.

ELECTRIC WINDOWS

Comfort locking

Negative control signal

The locking of the windows is obtained timing the GREEN/BLUE doors closure wire of the

vehicle.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

Pos. nr. 10, 16 way black connector nr.2

Pos. nr. 7, 16 way black connector nr.2

Car body

The 16 way black connector is located in the central of the central locking unit placed under

the moquette of the footrest of the driver’s side seat.

Vehicle

GREEN/VIOLET

GREEN/GREY

Ground

IMMOBILISATION POINT

Fuel pump

Cut the 1,5 mm 2 GREEN/YELLOW wire, at the position nr.32, of the 6 way light blue

connector, near the connector mentioned above.

STARTER

Relay pump supply

Cut the 1,5 mm 2 GREEN/YELLOW wire located in the wiring harness coming out of the fuse

marked nr. 34 in the fuse box.

BONNET SWITCH

Install an additional switch near the left lateral headlamp.

DOORS SWITCH

Connect to the GREEN/YELLOW wires at the position nr.1, RED/GREY at the position nr.10,

BLACK/RED at the position nr.12 and BLACK/VIOLET at the position nr.14 located in the 16

way light brown connector coming out of the modular system under the moquette on front of

the driver’s seat.

BOOT SWITCH

Positive polarity control signal

Connect to the 1 mm 2 RED/GREEN wire at the position nr.9 located in the 12 way black

connector coming out of the modular system under the moquette on front of the driver’s seat.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

aua603gbbtr1.doc

Art. 3800

YELLOW/BLACK

GREY/BLACK

VIOLET

ORANGE

VIOLET/WHITE

ORANGE/WHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: