Renault Re-Prog Procedure (ENG).pdf

3585A

Service 65678

WHITE TECHNICAL NOTE

EDITION ANGLAISE

JANUARY 2005

77 11 338 822

Type

S/ Section

All Types

01B

XXX X

01E

COMPUTER PROGRAMMING AND REPROGRAMMING PROCEDURE

Engine:

Basic manual:

All computer reprogramming Technical Notes

XXX

Gearbox:

This Technical Note relates to onboard computer Programming and Reprogramming operations

of using a RENAULT.NET connection or a Reprogramming CD (Part No: 77 11 298 859 ).

"The repair procedures given by the manufacturer in this document are based on the

technical specifications current when it was prepared.

All rights are reserved by RENAULT s.a.s.

Copying or translating, in part or in full, of this document or use of the service part

reference numbering system is forbidden without the prior written authority of

RENAULT s.a.s.

The procedures may be modified as a result of changes introduced by the

manufacturer in the production of the various component units and accessories from

which his vehicles are constructed".

101B

VEHICLE GENERAL INFORMATION

Computer Programming - Reprogramming

VEHICLE GENERAL INFORMATION

Computer Programming - Reprogramming

01B

CONTENTS

Page

GENERAL INFORMATION..........................................................................................................................................2

Tooling required .......................................................................................................................................................2

Programming ............................................................................................................................................................3

Reprogramming........................................................................................................................................................3

OPERATING PROCEDURE (Programming and reprogramming a computer)............................................................4

Preparing the RENAULT CLIP diagnostic tool .........................................................................................................4

Preparing the vehicle ................................................................................................................................................4

Programming - reprogramming phase......................................................................................................................5

Returning the vehicle ................................................................................................................................................5

CLIP screens depending on programming - reprogramming step............................................................................6

Order of the screens.................................................................................................................................................7

CLIP SCREEN ERROR MESSAGES AND PROCEDURE TO FOLLOW ...................................................................9

CODE SERVER PROCEDURE (in CD mode only) ...................................................................................................12

EMERGENCY PROCEDURE ...................................................................................................................................13

CONSULTING THE COMPUTER IDENTIFICATION FRAME ...................................................................................14

CONSULTING THE COMPUTER'S HISTORY ..........................................................................................................14

CONSULTING THE DIAGNOSTIC TOOL LOG ........................................................................................................15

SPY FILE (upon the request of Techline) ..................................................................................................................16

Creating the spy file................................................................................................................................................16

Recovering the spy file after programming - reprogramming .................................................................................16

01B-1

VEHICLE GENERAL INFORMATION

Computer Programming - Reprogramming

01B

GENERAL INFORMATION

Two types of operation can be carried out in After-Sales, either programming or reprogramming of the computer.

These operations apply to all vehicles and all types of (re)programmable computer (e.g: Injection, Gearbox, Air

conditioning, Instrument panel, Parking brake, UCH).

The two types of operation are carried out with the RENAULT CLIP diagnostic tool using either RENAULT.NET, or

the Programming - Reprogramming CD Part No. 77 11 298 859.

The reprogramming data available via RENAULT.NET is always more up to date than that available on the CD

(Part No. 77 11 298 859).

The CD is edited and distributed every month in the same way as the diagnostic tools update.

Each CD cancels and replaces the previous one.

Tooling required

● CLIP with the most recent update.

● 1 connection to RENAULT.NET (requires a CLIP with a RF kit and a RENAULT.NET certificate)

1 reprogramming CD, Part No. 77 11 298 859 from the current month.

● 1 RENAULT approved battery charger.

● The FAULT FINDING REPAIR MANUAL relevant to the vehicle and the system to be (re)programmed.

● 1 RENAULT.NET connection to the NRE reprogramming codes server for each programming - reprogramming with

a reprogramming CD. See CODES SERVER PROCEDURE .

01B-2

VEHICLE GENERAL INFORMATION

Computer Programming - Reprogramming

01B

Programming

The operation consists of downloading the calibration using the RENAULT CLIP diagnostic tool.

It affects computers supplied non operational (also known as blank) by the Parts Department for all vehicles in the

RENAULT range, but only for certain types of computer.

The types of computers which are currently programmable are the engine management computer (Petrol, Diesel

and LPG Injection) and the automatic and mechanical gearbox computers.

When To Program:

The operation is carried out as part of a computer replacement operation.

The non operational status of the computer, supplied by the Parts Department, is specified in DIALOGYS by the

display of the message:

Information:

Specific characteristic.

COMPUTER TO BE PROGRAMMED

Reprogramming

The operation consists of exchanging the software and/or calibration for the most recent version using the RENAULT

CLIP diagnostic tool.

It relates to computers already fitted in the vehicle as well as computers supplied operational (also called "full". E.g:

Air conditioning) by the Parts Department , for the entire RENAULT range.

It enables systematic replacement of the computer to be avoided.

After having filled in the vehicle's VIN in the main menu, the types of (re)programmable computer are displayed in

the RENAULT CLIP diagnostic tool REPROGRAMMING menu.

When To Reprogram:

The operation is carried out within the framework of:

● an OTS, or a Technical Note arising from a fault resulting from an After-Sales problem, or a functional improvement.

● RENAULT Technical Directives or following a request from the Techline.

01B-3

VEHICLE GENERAL INFORMATION

Computer Programming - Reprogramming

01B

OPERATING PROCEDURE (Programming and reprogramming a computer)

The operating procedure for Programming and Reprogramming operations is identical.

The operation is carried out using the RENAULT CLIP diagnostic tool, either connected to RENAULT.NET or with the

reprogramming CD.

IMPORTANT

To prevent any computer malfunctioning or locking, the following operations must be carried out before

(re)programming.

Preparing the RENAULT CLIP diagnostic tool

● Always use the latest available version of the CLIP update.

● Always use the RENAULT.NET connection if available, in preference to the CD.

The reprogramming data available via RENAULT.NET is always more up to date than that available on

the CD.

● Whenever the CD mode is being used for programming - reprogramming, always use the latest available version

of the CD.

● Connect CLIP to the mains.

● Set the RENAULT CLIP diagnostic tool Windows monitor screen locking delay to NONE or 60 minutes minimum.

Setting the RENAULT CLIP diagnostic tool Windows monitor screen locking delay:

In the RENAULT CLIP diagnostic tool Windows system:

–Right click on the mouse and select P roperties .

–In the new Display Properties window, select the Monitor screen tab.

Then position the monitor screen on ( None ) or set the Wait time delay to a minimum of 60 minutes.

– Confirm and close the display windows.

Preparing the vehicle

● Connect an approved battery charger to the vehicle.

● Switch off all the vehicle's electrical consumers (Lights, Interior lighting, Air conditioning, CD Radio, etc).

● Switch on the ignition.

01B-4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: