GlobalTIS Version 22.0 Installation Instructions and Activation.doc

(25 KB) Pobierz

 

Installation Instructions and Activation

 

Install GlobalTis and during the installation click in all windows "Next"!!!

DO NOT CHANGE anything and leave all AS THEY ARE!!!

 

When installation finish, 1st DISABLE any Firewall that you have all ready enable!!! EVEN and Windows Firewall!!!

 

Run GlobalTIS and go and FILL Dealer info form (anything you wish...) BUT FULL filling!!!

 

Save your Dealer details

Click next till global tis is installed

 

Once installed double click desktop icon global tis

 

You will be requested to input some information and you must be connected to the internet at this time.

 

At the top of the page there is tab to edit dealer info.

 

Enter any information , make it up as not important  up to you truth or lies 

 

Enter any valid email address as email address you may get codes back to activate so you dont need to keep copying and pasting     

 

then click save.

 

then back on first page activate online should be highlighted ,click on it

 

it will give you a request id r************

 

to make it work straight away use these codes underneath

 

Delete request id its put in  and replace with these codes

you need to use all 3 as they match and will be easier if you make a little note pad with these codes in so you can access them easier

each time you want to activate it as it will only work till pc restarted with these 3 codes then you need to copy and paste again and it will work

till pc restarted

 

Requestid: r001121917

 

Subscriber-id: t001121918

 

License key:3285-6996-31be-6e7d-85c8-af03-91b4-c097-c59d-9578-7326-dd93-f317-56a8-92a2-4762

Then click on register licence key and it will error so log out

 

Then click on global tis icon again and hey presto it works and will work until pc restarted ,then if you need to use

Again just copy and paste  3 codes back in again and do same as above

 

First use you will need to install java plug in as prompted on first screen if you dont have java latest version on pc already but best

if you download latest version

 

You can install on as many pcs as you have using codes as above ,there is no gtee you will get 3 matched codes from gm as server is temperamental

and you may get them next day or next month or not at all and are not gteed .all i gtee is it works

Please note to enter codes you need to be connected to the internet for a few seconds

if you get the codes matched to the request id the software gave you it will work fully offline .

 

If using rs232 connection make sure your com port on pc  is set to  baud rate  115200 using device manager

then in global tis on each section ie tech 2 view it has a settings tab ,set that to same comport ,and settings on security and software update etc

you only need to do it once

 

Before updating tech 2 card make sure tech 2 view works and all settings are correct ,this is wher i can remote connect for you and do it all if needed 

 

If you click on tech 2 view ,security or software download icons they each have a settings tab and each will need to be configured to that comport

 

If using usb to serial converter then cheap ones that work with tis 2000 dont tend to work with global tis we recommend belkin ,quite cheap about 25 gbp and work 100 percent  

 

 

Before updating card on tech 2 please set it all up and test with tech 2 switched on and on main screen  using tech 2 view icon to make sure of good connection then disconnect

 

Update tech 2 software using custom not standard and pick latest version then language you want it in 

 

It takes about 20 mins to do software on card

 

Once software is updated click on security.machine will flash on and off four times and say security level 3 acccess enabled .this will need to be done quite often for tis aproval and sps

 

 

ENJOY..!!!!!!!!!!!!!!!

 

Zgłoś jeśli naruszono regulamin