Satellite 5100.pdf

(5852 KB) Pobierz
5100ser.cdr
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
5100 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. 3mm Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
49472382.051.png 49472382.062.png 49472382.073.png 49472382.084.png 49472382.001.png 49472382.002.png 49472382.003.png 49472382.004.png 49472382.005.png 49472382.006.png 49472382.007.png 49472382.008.png 49472382.009.png 49472382.010.png 49472382.011.png 49472382.012.png 49472382.013.png 49472382.014.png 49472382.015.png 49472382.016.png 49472382.017.png 49472382.018.png 49472382.019.png 49472382.020.png 49472382.021.png 49472382.022.png 49472382.023.png 49472382.024.png 49472382.025.png 49472382.026.png 49472382.027.png 49472382.028.png 49472382.029.png 49472382.030.png 49472382.031.png 49472382.032.png 49472382.033.png 49472382.034.png 49472382.035.png 49472382.036.png 49472382.037.png 49472382.038.png 49472382.039.png 49472382.040.png 49472382.041.png 49472382.042.png 49472382.043.png 49472382.044.png 49472382.045.png 49472382.046.png 49472382.047.png 49472382.048.png 49472382.049.png 49472382.050.png 49472382.052.png 49472382.053.png 49472382.054.png 49472382.055.png 49472382.056.png 49472382.057.png 49472382.058.png 49472382.059.png 49472382.060.png 49472382.061.png 49472382.063.png 49472382.064.png 49472382.065.png 49472382.066.png 49472382.067.png 49472382.068.png 49472382.069.png 49472382.070.png 49472382.071.png 49472382.072.png 49472382.074.png 49472382.075.png 49472382.076.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5100 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
release lever
PC Card
Battery pack
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Lift out the battery pack .
4. Separate the battery pack from the battery cover.
1. Press the eject button of the PC Card you want to
remove.
2. Press the extended eject button to pop the PC card
out slightly.
3. Grasp the PC Card and pull it out
NOTE : Before removing any PCMCIA device, make sure
it is “STOPPED” in the PC Card Manager.
HDD REMOVAL
HDD cover
M2.5x4 black flat head screw
HDD bracket handle
HDD assy
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing
HDD slot cover and pull out the cover .
3. Grasp the HDD bracket handle and pull to
disconnect the HDD assembly.
4. Lift the HDD assembly out of the HDD bay.
.
TOSHIBA
Tough Enough for Today’s World
49472382.078.png 49472382.079.png 49472382.080.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5100 Series
HDD REMOVAL
MEMORY MODULE REMOVAL
Memory
slot cover
M3x4 Flat head screws
HDD bracket
M2.5x4 black flat head screws
5. Remove four M3x4 brass flat head screws securing
the HDD bracket to the drive.
1. Turn the computer upside down.
2. Remove two M2.5x4 black flat head screws
securing the memory cover.
3. Lift out the cover .
MEMORY MODULE REMOVAL
MINI PCI CARD REMOVAL
Memory
module
Mini
PCI slot
cover
Memory clips
M2x3 black screws
4. Gently press out on the memory clips and pull the
memory module out of the connector on a 30 degree
angle.
1. Turn the computer upside down.
2. Remove three M2x3 black screws securing
the Mini PCI slot cover.
TOSHIBA
Tough Enough for Today’s World
49472382.081.png 49472382.082.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
5100 Series
MINI PCI CARD REMOVAL
MODEM BOARD REMOVAL
Black/white
mini coax
PCI clips
Wireless LAN card
Modem slot cover
M2x3 black flat head screws
3. Disconnect the black and white coax cables from
the mini PCI wireless LAN card.
4. Gently press out the Mini PCI slot clips and pull the
Mini PCI wireless LAN card out of the connector on
a 30 degree angle.
NOTE: The mini PCI wireless LAN card is optional
for the 5100 series.
1. Remove one M2x3 black screw securing the
modem slot cover.
2. Insert your finger nail or the case separator into the
notched side of the cover and lift up to release the
latch securing the modem slot cover.
MODEM BOARD REMOVAL
KEYBOARD REMOVAL
Modem
Latch
M2x3 black screws
MJ Harness
Keyboard holder
3. Disconnect the MJ harness from JP1 on the modem
board.
4. Remove two M2x3 black screws securing the
modem board.
5. Lift up the modem board to disconnect it from the
system board.
1. Open the display panel.
2. Remove the keyboard holder at the top of the
keyboard.
TOSHIBA
Tough Enough for Today’s World
49472382.083.png 49472382.085.png
Zgłoś jeśli naruszono regulamin