OPSIN97GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

OPEL

MOD. SINTRA YEAR 97 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the

available bracket near the passenger’s side shock absorber. Pass the cables

through the core hitch located above the clutch pedal.

POWER SUPPLY

+ 30: connect to the 4 mm 2 WHITE/RED wire located at the entrance of the fuse

box.

- 31: connect to the car body.

IGNITION WIRE

+ 15/54: connect to the PINK wire located in the row marked “A” of the multiway

connector, under the driver’s side dashboard, on the left of the clutch pedal.

DIRECTION INDICATORS

Connect to the BLUE and LIGHT BLUE wires located in the row marked “A” of

the multiway connector, under the driver’s side dashboard, on the left of the

clutch pedal.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side

Cut the GREEN wire at the position “A”.

Front window, passenger’s side

Cut the BLACK wire at the position “D”.

The wire are in the wiring harness coming out of the 16 way connector, near the

door core hitch, driver’s side.

CENTRAL DOORS LOCKING

Positive control signal

Connect to the 0,35 mm 2 ORANGE/BLACK wire at the position “P” (unlock) and

RED/BLACK wire at the position “R” located in the connector mentioned above.

For alarm extension (Art. 144)

Connect to the BLACK wire at the position “S” (set) and to the LIGHT BROWN

wire at the position “N” (unset), located in the wiring harness of the 16 way

connector, near the core hitch, driver’s side.

IMMOBILISATION POINT 1

Fuel pump

Cut the 1,5 mm 2 GREY wire located in the wiring harness of the left sill cover,

driver’s side.

IMMOBILISATION POINT 2

Electronic ignition cut

Cut the 0,35 mm 2 PINK wire located in the wiring harness coming out of the fuse

marked “injection/immobilizer” in the fuse box, under the dashboard,

passenger’s side.

STARTER

+ 50: Cut the YELLOW wire located in the wiring harness coming out of the

connector under the steering column.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, in

correspondence with the left lateral headlamp.

DOORS AND BOOT SWITCHES Connect to the YELLOW wire at the position “J” of the 16 way connector, near

the core hitch, driver’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

opsin97gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: