c01298699.pdf
(
280 KB
)
Pobierz
Winter_sunburst-inst
ornament gift card holder
ASSEMBLY INSTRUCTIONS
Time to Complete: Approximately 25 minutes Level: Easy
GETTING STARTED
Materials:
• Scissors or X-ACTO knife
• Cutting mat (optional)
• Butter knife
• Metal-edged ruler (optional)
• Hole punch
• Multipurpose glue
• Brads, grommets, or ribbon
1
Be sure to follow the printing instructions for
double-sided printing when you download
your artwork.
3
Using a metal ruler as a guide, run the backside
of a butter knife along all of the dashed lines, and
then crease along the dashed lines.
2
Using scissors, or an X-ACTO knife and cutting
mat, cut along solid black lines to create the
box shape.
ASSEMBLE YOUR WINTER SUNBURST GIFT CARD HOLDER
4
To assemble the card box, fold the tall creased
flaps and the shorter side flaps up around the
long rectangle.
5
Fold the small square tabs inward.
6
Fold and glue the top half of the creased
flaps over the square tabs on both sides.
7
To assemble the sleeve, fold along the creases, gluing tab A to the
underside of the other end of the rectangle.
8
Insert a gift card or message of your choice in the
box and slide it into the sleeve.
A
© 2007 Hewlett-Packard Development Company
ASSEMBLE YOUR WINTER SUNBURST GIFT CARD HOLDER EMBELLISHMENTS
9
Follow printing instructions to print the
embellishments. Using scissors or an
X-ACTO knife and cutting mat, cut
along solid black lines to make two
rectangles. (For now, ignore curved
solid black lines.)
10
Beginning at the side with the curved solid
black lines, crease along the dashed lines,
starting with a mountain fold (see folding key
below) and alternating with valley fold.
11
Keeping the folds gathered, cut the entire
stack along the curved solid black lines.
KEY TO FOLDING
Mountain Fold
Valley Fold
12
Crease the stack along the dotted line
in the center.
13
Staple the stack once at the dotted line.
14
Fan out the stack on either side of the
staple to create a flower. Glue A to B
and D to E to bring the halves of the
flower together. Repeat steps 10-14 to
make the other flower.
D E
A B
15
Choose a button topper, either one you’ve
printed or one of your own. Glue the button to
the top center of the flower.
16
Punch out ’s on the remaining rectangle
(the ribbon).
17
To create the ribbon for the box, glue the
flower to the ribbon at point B.
18
Loop thread or string through the two holes
on the ribbon.
19
Fold the ribbon in along the creases, gluing
the white end, labeled C, to the underside of
the opposite end of the rectangle.
20
Slide the embellished ribbon around the box.
C
© 2007 Hewlett-Packard Development Company
Plik z chomika:
okruszki
Inne pliki z tego folderu:
c00457930.pdf
(72 KB)
c00460917.pdf
(648 KB)
c00460949.pdf
(410 KB)
c00460986.pdf
(24 KB)
c01159881.pdf
(266 KB)
Inne foldery tego chomika:
Zgłoś jeśli
naruszono regulamin