c01159979.pdf

(284 KB) Pobierz
Snowflower_box-inst
ornament gift box
ASSEMBLY INSTRUCTIONS
Time to Complete: Approximately 20 minutes Level: Easy
GETTING STARTED
Materials:
1
Be sure to follow the printing instructions for
double-sided printing when you download
your artwork.
3
Using a metal ruler as a guide, run the backside
of a butter knife along all of the dashed lines, and
then crease along the dashed lines.
• Scissors or X-ACTO knife
• Cutting mat (optional)
• Butter knife
• Metal-edged ruler (optional)
• Multipurpose glue
• Stapler
• Needle and embroidery thread
or other string
• Button (optional)
2
Using scissors or an X-ACTO knife and cutting
mat, cut along solid black lines to create the
box shape.
ASSEMBLE YOUR SNOWFLOWER GIFT BOX
4
Glue the white tab marked “A” to the
underside of “B,” making a cylinder.
5
Fold in bottom tab marked 1.
Repeat with tabs 2 and 3.
6
Tuck tab marked 4 under tab 3.
2
3
4
3
1
B
A
7
Secure with glue to hold.
8
Turn box over, fold box lid down, and follow instructions on the following
page to embellish.
© 2007 Hewlett-Packard Development Company
23442275.054.png 23442275.065.png 23442275.076.png 23442275.087.png 23442275.001.png 23442275.010.png 23442275.011.png 23442275.012.png 23442275.013.png 23442275.014.png 23442275.015.png 23442275.016.png
 
 
23442275.017.png 23442275.018.png 23442275.019.png 23442275.020.png 23442275.021.png 23442275.022.png 23442275.023.png 23442275.024.png 23442275.025.png 23442275.026.png
 
23442275.027.png 23442275.028.png
 
23442275.029.png 23442275.030.png 23442275.031.png 23442275.032.png 23442275.033.png 23442275.034.png 23442275.035.png 23442275.036.png 23442275.037.png 23442275.038.png 23442275.039.png 23442275.040.png 23442275.041.png 23442275.042.png 23442275.043.png 23442275.044.png 23442275.045.png 23442275.046.png 23442275.047.png 23442275.048.png 23442275.049.png 23442275.050.png 23442275.051.png 23442275.052.png 23442275.053.png 23442275.055.png 23442275.056.png 23442275.057.png 23442275.058.png 23442275.059.png 23442275.060.png 23442275.061.png 23442275.062.png 23442275.063.png 23442275.064.png 23442275.066.png 23442275.067.png 23442275.068.png 23442275.069.png 23442275.070.png
9
Follow printing instructions to print the
embellishments. Using scissors or an
X-ACTO knife and cutting mat, cut
along solid black lines to make two
rectangles. (For now, ignore curved
solid black lines.)
10
Beginning at the side with the curved solid
black lines, crease along the dashed lines,
starting with a mountain fold (see folding key
below) and alternating with valley fold.
11
Keeping the folds gathered, cut the entire
stack along the curved solid black lines.
FOLDING KEY
Mountain Fold
Valley Fold
12
Crease the stack along the dotted line
in the center.
13
Staple the stack once at the dotted line.
14
Fan out the stack on either side of the
staple to create a flower. Glue A to B
and D to E to bring the halves of the
flower together. Repeat steps 10-14 to
make the other flower.
D
E
A
B
15
Glue the bigger flower to the top of the box.
16
Glue the smaller flower to the top of the
bigger flower.
17
Choose a button topper, either one you’ve
printed or one of your own. Thread string
through the button and sew to the top flower,
leaving enough string to hang the box.
© 2007 Hewlett-Packard Development Company
23442275.071.png 23442275.072.png 23442275.073.png 23442275.074.png 23442275.075.png 23442275.077.png 23442275.078.png 23442275.079.png 23442275.080.png 23442275.081.png 23442275.082.png 23442275.083.png 23442275.084.png 23442275.085.png 23442275.086.png 23442275.088.png 23442275.089.png 23442275.090.png 23442275.091.png 23442275.092.png 23442275.093.png 23442275.094.png 23442275.095.png 23442275.096.png 23442275.097.png 23442275.002.png 23442275.003.png 23442275.004.png 23442275.005.png 23442275.006.png 23442275.007.png 23442275.008.png 23442275.009.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin