KG-UVD1 Programming Cable User’s Manual
First of all, please double click this icon to open the programming software.. Please refer to the below picture:
Toolbar
Files
"File" drop-down menu options are as follows
【NEW】：Using this order can create new document, and make the present information resumed to the default value of programming software.
【SAVE】：Using this order can save the present information to the computer for your future use.
【OPEN】：Using this order can open the saved information.
【PRINT】：Using this order can print the documents. The order displays “PRINT” dialogue box, in which you can specify the page range to print, shares, printers and other objectives of the Printer Setup Options
【ESCAPE】：Directly escape the programming software.
Program
"Programming" the drop-down menu options are as follows:
【Read the data from the transceiver】The read-out data includes “Channel Information”, “Optional Functions” and “Key Setting”.
When selecting “Read the data from the transceiver”, the window opens after finishing read.
Note: If the communication error happens during transferring the data, the window opens. Please confirm if the programming cable is connected well and the transceiver turns on.
Shortcut:
Toolbar:
【Write Data in Transceiver】:Write the data in the transceiver. The writing data includes “Channel Information”, “Optional Functions” and “Key Setting”. When selecting “Write data in transceiver”, the window When selecting “Read the data from the transceiver”, the window opens after finishing read.
Note: If the communication error happens during transferring data, the window opens. Please confirm if the programming cable is connected well and the transceiver turns on.
Shortcut
Edit
"Edit" the drop-down menu options are as follows:
【CHANNEL INFORMATION】 This setting is only available on channel mode.
a) Number: This transceiver can store 128 channels.
b) Receiving Frequency: You can input your desired frequency. The frequency range is 136.0000-520.995.
Note: If the inputted frequency is out of the permitted frequency range, it will pop-up the window to prompt you the frequency is out of range when writing.
a) Transmitting Frequency: You can input your desired frequency. The frequency range is 136.0000-520.
e) CTCSS/DCS Decoding: Sometimes you just want to hear the calls from some specific member or group. At this moment, by using “CTCSS/DCS”, you can ignore (don’t hear) the unwanted calls from the others who use the same frequency. Only when receiving the same CTCSS/DCS signals, the transceiver release from the mute.
u CTCSS
Option：67.0－254.1 Hz
u DCS
Option：000－754
Note: DN×××---Normal DCS, DI×××---Reverse DCS. On each channel, CTC/DCS can be mixed. You can select on the list.
f) CTCSS/DCS Encoding
g) Transmission Power
Function: Selecting the output power of transceiver
Option: High (4W)/ Low (1W)
Default: High
h) Adding Scan
Function: This function is to confirm if the stored channels are added to the scanning list.
Option：Yes/ No
Default：Yes
b) Channel Bandwidth
Function: Setting the bandwidth of working band
Option: Narrow (12.5KHZ)/ Wide (25KHZ)
Default：Wide（25KHZ）
c) Busy Lock
Function: Starting this function can prevent the transceiver from interfering other communicating stations. If the selected channel is occupied by other broadcasting station, please press PTT key and the transceiver cannot transmit.
Option: No/Carrier Wave
Default: No
d) Channel Name
Function: Editing channel name
Option：（A~Z）26 letters，（0~9）10Arabic numerals
Default: Empty
【Optional Functions】
Power on Message
Function；Selecting the display usage when power on
Option: Full Screen/ Welcome Interface/ Battery Power
Default: Full Screen
Operation Voice Prompt
Function: Selecting voice prompt type
Option: English/ Chinese/ OFF
Default: Chinese
Transmit Overtime Timer
Function: The aim of TOT is to restrict the transceiver to transmit continuously for a long time. When the transceiver transmit continuously over the limited time, the transmission will be forced to intermit and the voice prompt sounds.
Option: 15~600 seconds
Default: 60 seconds
Transmit Overtime Warning Timer
Function: Transmit overtime warning timer means the transceiver sounds voice prompt and the status LED flickers when the transmitting time nearly reach the TOT limited time.
Option: OFF/1~10
Default:5
Channel Mode
Function Menu Available: means whether starting up the menu function key on channel
Option: Available/ Forbid
Default: Available(Tick)
Save Mode
Function: This function is to turn off the receiver circuit for a period of time, and then open it again for a moment to detect signal.
Option: ON/OFF
Default: ON (Tick)
Keypad Auto Lock
Function: Making the keypad losing functions
Default: OFF (Untick)
Auto Lock means the keypad will auto lock without any operation in 15seconds.
Keypad Lock
Keypad lock means once the keypad unlocks, it will be always on unlock after locking
Beep
Function: Beep prompt is a voice prompt function that can confirm the transceiver operation prompt, operation error status or malfunction prompt. We suggest you open this function to conveniently detect wrong operation and malfunction.
Option: ON/ OFF
Stopwatch
Function: Selecting if starting up the stopwatch
Option：ON/ OFF
Default：OFF（Untick）
VOX Transmission
Function: When detecting voice, the transceiver switches to transmission mode.
Option: OFF/1~10 (Higher level, less sensitivity)
Default: OFF
Scan Mode
Function: The transceiver will stop scanning on the channel that detects signal (or memory channel). According to your resume way, the transceiver will continue or stop scanning.
Option: Time: After detecting signal, the transceiver will continue to scan without any operation in 5 seconds.
Carrier Wave: The transceiver will stop scanning after detecting signal. It will continue to scan after 3 seconds when signal disappears.
Search: The transceiver will stop scanning after searching signal.
Default: Time
Backlight Selection
Function: Lightening display screen and keypad
Option: OFF/ON
Note: This function is unavailable when receiving or transmitting.
Transmitting Voice Prompt
Function: Selecting the transmitting voice prompt mode
Option: OFF: Turn off all, not transmit voice prompt.
Begint: Press PTT key, then the voice prompt is transmitted.
End：Release PTT key, then the voice prompt is transmitted
Begin&End: Pressing or releasing PTT key can transmit the voice prompt.
Mode Switching Password
Function: If setting the password of switching over frequency and channel mode.
Option: 0~9
Default: 000000（should be edited by 6 numbers）
Note: Switching between frequency mode and channel mode: MENU+TDR
Initialization code
Function: If setting the password to lock when initializing the transceiver.
Option:0~9
Default: 000000（should be edited b...
gilfred