PACKET.TXT

         ﾉﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｻ
         ｺ                                                     ｺ
         ｺ     Compex LinkPort\TX32A CarcBus Fast Ethernet     ｺ
         ｺ           CopyRight(c) 2000 Compex Inc.             ｺ
         ｺ                All rights reserved                  ｺ
         ｺ                                                     ｺ
         ﾈﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍﾍｼ

Packet Driver
==============

Introduction:

This document describes the procedure to setup the Packet driver for
LinkPort/TX32A CardBus Fast Ethernet Adapter.

Location of Driver:     \PKT\CB8139PD.COM

Sample Configuration Files:
---------------------------
Packet driver for LinkPort\TX32A CardBus Fast Ethernet NIC, version 3.19

usage: CB8139PD  [options] <packet_int_no> [-m media_type] [bus_no device_no]
   -i -- Force driver to report itself as IEEE 802.3 instead of Ethernet II.
   -d -- Delayed initialization.  Used for diskless booting
   -n -- NetWare conversion.  Converts 802.3 packets into 8137 packets
   -w -- Windows hack, obsoleted by winpkt
   -p -- Promiscuous mode disable
   -u -- Uninstall
  media_type ::  auto    = Auto_negotiation
                 10half  = Force 10M/HalfDuplex
                 10full  = Force 10M/FullDuplex
                 100half = Force 100M/HalfDuplex
                 100full = Force 100M/FullDuplex
 If no media type is specified, hardware setting is used

NOTE: <packet_int_no> is software vector number this driver uses.
      
For example:
   RTPCI /md000 /i10
   RTBIOS.COM
   CB8139PD.COM  0x60

                        ----------------------