ADMCF326.pdf

Welcome to the ADMCF326 DSP Motor Control Development Tool Kit!

Thank you for purchasing an ADMCF326-EVALKIT. This kit includes everything required for users to:

1. Evaluate the ADMCF326 DSP Motor Controller

2. Fully develop a complete user application

Packing List

Included in your Developers Tool Kit should be the following:

ADMCF326 Processor Board with ADMCF326XR installed in socket

Qty

ADMC Connector Board

9-Pin Male-to-Female Serial Cable

Software

Motion Control Development Tools

1 CD

Documentation

ADMCF32X Processor Board User Manual

ADMC Connector Board User’s Manual

Motion Control Development Tools Release Notes

ADMCF32X Developer’s Reference Manual

ADSP-2100 Family User’s Manual

ADSP-2100 Family Assembler Tools and Simulator Manual

ADSP-2100 Family Programmers Quick Reference

Product Registration Form

www.analog.com/motorcontrol Information Card

Technical Support

Analog Devices provides comprehensive support either via the internet or our dedicated applications and

technical support team.

Internet Support

Please visit our dedicated Internet site ( www.analog.com/motorcontrol ) for:

- Product information and Datasheet

- Application Notes with corresponding Example Code

- Free eNewsletter subscription – receive the latest information on ADI’s DSP Motor Controllers

- Free Software upgrades

- Buy Online – E-commerce site

Rev. 2.0

89-001959-01

Hardware

ADMCF326 Development Tool Kit

Technical and Applications Department

If you wish to ask a technical question related to the selection of a device for your application or a

specific question about any of the ADMC devices listed at our dedicated motor control Internet site,

please contact our technical and applications department.

–

mcgapps@analog.com

Phone

–

(800) ANALOGD (781-937-1799)

Fax

–

(781) 937-1707

Getting Started

Follow these steps to get started with the ADMCF326 Developers Tool Kit:

1.) Read through the ADMCF32X Processor Board User’s Manual and the ADMC Connector

Board User’s Manual included in your kit

2.) Connect the processor board to a regulated +5 Vdc power supply (+5V and GND)

3.) Connect the serial cable from a COM port on your PC to the 9-pin UART connector on the

processor board. Take note of which COM port you are using on your PC. When you run the

debugger you will be required to enter which COM port you are using. The default for the

software is COM1.

4.) Read the Motion Control Development Tools Release Notes and follow the instructions listed

to install the development software on your PC.

5.) Follow the steps listed in the “Getting Started with the Motion Control Debugger,” found in the

ADMCF32X Developer’s Reference Manual to get the software running on your processor

board. If you receive a communication error message from the debugger when you start it, press

the H/W reset button and then click "Retry". If the problem persists check that the jumpers on

the processor board are correctly configured. Check that another application is not using the

COM port that you have connected to the processor board. Also, follow the “Troubleshooting”

section in the ADMCF32X Developer’s Reference Manual .

6.) Once you have successfully started the Motion Control Debugger Software on your processor

board, you are ready to begin working with the ADMCF326. Follow the “Tutorial” section found

in the ADMCF32X Developer’s Reference Manual to assemble, link, and run the example

programs on the processor board. You can also use example programs from the Analog Devices

Motor Control website to create your own application code.

Need Additional Information?

To understand more about the ADMCF326, please consult the datasheet, ADMCF32X Developer’s

Reference Manual , Application Notes included in the kit or available on the Motor Control Internet site,

and the ADSP-2100 Family User’s Manual. For more information on the software tools, please consult

the ADMCF32X Developer’s Reference Manual and the ADSP-2100 Family Assembler Tools and

Simulator Manual.

89-001959-01

Page 2

Rev. 2.0

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: