sts121payloadassembly.pdf

(421 KB) Pobierz

Revised

© 2008

Assembly Instructions for STS-121

payload

(Discovery’s Return to Flight-1)

793829253.017.png

793829253.018.png

Building “Leonardo” Multipurpose Logistic Module

Front

Aft

Make a cylinder as photo shows and glue both conical parts on both ends.

Attached the Docking system

See photos for reference when building this module.

793829253.019.png

793829253.020.png

793829253.001.png

793829253.002.png

793829253.003.png

793829253.004.png

793829253.005.png

793829253.006.png

Note that the circular white

patches are not present for

this mission. These Visual

Targets first appeared during

the

first

missions

for

Leonardo and Raffaello.

(STS-102, STS-100, STS-

105, STS-108, and STS-111)

Building the Integrated Cargo Carrier

First build the main part of this platform as photo shows. This photo shows the prototype.

793829253.007.png

793829253.008.png

Glue the upper portion of

the platform on top of the

main part as photo shows.

Then the bottom portion

is glued.

These are the main

elements that will be

glued on top of the

platform. Match the

numbers.

793829253.009.png

793829253.010.png

793829253.011.png

Photo shows the TUS-RA

(Trailing Umbilical

System-Reel Assembly.

Arrows indicate the

sequence how these parts

are glued one on top of

each other.

The whole TUS-RA

object is then placed on

top of the small opened

cradle in a diagonal

position.

Pump Module

See photos below for reference.

793829253.012.png

793829253.013.png

793829253.014.png

793829253.015.png

793829253.016.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin