d7sys_option_e.pdf

Contents, Foreword

Basic software

SIMATIC D7-SYS

CFC

STEP 7 option packages

for D7-SYS

SFC

Index

Manual

Edition 12.2003

Safety guidelines

This Manual contains notices which you should observe to ensure your own personal

safety, as well as to protect the product and connected equipment. These notices are

highlighted in the Manual by a warning triangle and are marked as follows according to

the level of danger:

DANGER

indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION

used with the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION

used without safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

NOTICE

used without the safety alert symbol indicates a potential situation which, if not avoided,

may result in an undesireable result or state.

Note the following:

Correct usage

This device and its components may only be used for the applications described in the

catalog or the technical description, and only in connection with devices or components

from other manufacturers which have been approved or recommended by Siemens.

Trademarks

SIMATIC  and SIMADYN D  are registered trademarks of Siemens AG.

Third parties using for their own purposes any other names in this document which refer

to trademarks might infringe upon the rights of the trademark owners.

Disclaimer of liability

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design,

are reserved.

Siemens AG

A&D

Frauenauracher Straße 80

91056 Erlangen

We have checked the contents of this manual for agreement with

the hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreement.

However, the data in this manual are reviewed regularly and any

necessary corrections included in subsequent editions.

Suggestions for improvement are welcomed.

 Siemens AG 2003

Technical data subject to change.

Siemens Aktiengesellschaft

Editions

SIMATIC D7-SYS

Manual

STEP 7 option packages for D7-SYS

Edition 12.2003

NOTE

Please note that the current edition of this documentation contains

different editions of the individual chapters. The following overview tells

you when a chapter was revised the last time.

Chapter

Ausgabestand

Overview

(chapter editions)

Foreword

Edition 12.2003

Basic software

Edition 12.2003

CFC

Edition 12.2003

SFC

Edition 03.2003

STEP 7 option packages for D7-SYS - SIMATIC D7-SYS

Edition 12.2003

Foreword

Purpose of this

Manual

This Manual explains the principle use and functions of the STEP 7

automation software with the main focus on the appropriate technological

and drive control components T400, FM 458-1 DP, SIMADYN D,

SIMATIC TDC or D7-SYS.

Basic knowledge

required

This Manual addresses programmers and commissioning engineers.

General knowhow regarding automation technology is required in order to

understand the contents of the Manual

Validity of the

Manual

This Manual is valid for SIMATIC D7-SYS Version 6.1.

Additional support

If you have questions relating to the use of the products described in the

Manual, which cannot be answered here, then please contact your local

Siemens office. You can also call the Hotline:

• Tel.:

+49(9131) 98-5000

• Fax:

+49(9131) 98-1603

• e-mail:

adsupport@siemens.com

Appropriate training courses are available in order to make it easier to get

to know the SIMADYN D automation system. Please contact the central

Training Center in D-Erlangen (I&S IS INA TC):

Training Center

• Tel.:

+49(9131) 7-27689, -27972

• Fax:

+49(9131) 7-28172

• Internet:

www.siemens.de/sibrain

• Intranet:

http://info-tc.erlm.siemens.de/

NOTE

This user part of the Manual does not include any detailed

information/instructions with individual descriptions, but is only intended

to provide a basic procedure. More detailed information on the dialog

boxes in the software and how they are handled is provided in the

appropriate online help.

iii

STEP 7 option packages for D7-SYS - SIMATIC D7-SYS

Edition 12.2003

Foreword

This manual is part of the overall documentation for the technological and

drive control components T400, FM 458, SIMADYN D, SIMATIC TDC

and SIMATIC D7-SYS:

Information

overview

Title

Content

System and

communications

configuring D7-SYS

The first project in a few steps

This Section provides an extremely simple entry into the methodology when

assembling and programming the SIMATIC TDC/SIMADYN D control

system. It is especially conceived for first-time users of a control system.

System software

This Section provides basic know-how about the structure of the operating

system and an application program of a CPU. It should be used to obtain an

overview of the programming methodology, and basis for configuring user

programs.

Communications configuring

This section provides you with basic know-how about the communication

possibilities and how you configure links to the communication partners.

Changeover from STRUC V4.x to D7-SYS

Essential features are included in this section, which have changed over

STRUC V4.x with the introduction of SIMATIC D7-SYS.

STEP 7 option packages

for D7-SYS

Basis software

This section explains the essential use and the functions of the STEP 7

automation software. For first users, it provides an overview on configuring,

programming and commissioning a station.

When working with the basis software, you can access the online help which

provides you with support when it comes to detailed questions on using the

software.

CFC

The CFC language (Continuous Function Chart) allows you to graphically

interconnect blocks.

When working with the particular software, you can also use the online help

which can answer detailed questions regarding the use of the

editors/compiler.

SFC

Configuring sequence controls using SFC (Sequential Function Chart) of

SIMATIC S7.

In the SFC editor, you generate a sequence chart using graphic resources.

The SFC elements of the chart are then positioned according to specific

rules.

Hardware

The complete hardware spectrum is described as reference in this Manuals.

Function blocks

These Reference Manuals provide you with an overview of selected function

blocks for the associated technological and drive control components T400,

FM 458-1 DP, SIMADYN D and SIMATIC TDC.

STEP 7 option packages for D7-SYS - SIMATIC D7-SYS

Edition 12.2003

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: