Toy - Smiley Bank Pattern (scrollsaw).pdf - Woodworking Plans - michaelneo

www.scrollsawinspirations.com Scrollergirl@aol.com

Copyrighted c 2004 by Diana Thompson

"Smiley Face Bank"

Coin slot

Read all directions before

cutting patterns.

Back and front of bank.

See directions at left.

Note: Coin slot is cut only on one

side, which will be the back

side of the bank.

Back and front of bank

Cut 2 of 1/4" stock

#5R blade

Plug

opening

Directions

Apply the pattern to one piece of 1/4" stock.

Drill a blade entry hole in the coin slot and

plug openning and cut them out.

Using pressure sensitive tape to hold the pieces

together stack this piece to another piece of

1/4" stock.

Cut around the outside line only.

Do not remove pattern.

Bank assembly.

Glue the back and front

pieces to the bank sides.

Cut around the inside line,

cutting through all three

thicknesses.

Finish as desired.

Bank sides

Cut 1 of 1 1/4" stock.

#5 blade

Directions

Apply pattern to the stock.

Cut out the inside line by drilling a small

blade entry hole and threading the blade

though it.

Cut out around outside line and

remove pattern.

Toy - Smiley Bank Pattern (scrollsaw).pdf