-------------------------------------------------------------------------------------------------- FAQ -------------------------------------------------------------------------------------------------- 1. Can I decode the V.A.G. navigation痴 code? No, it痴 impossible to decode the code! -------------------------------------------------------------------------------------------------- 2. So how can I program the code (V.A.G. group)? After reading the memory contents the software will detect the coding type. After detecting, select the code (there are 18 stored possibilities like 0203, 0239 ・ and reprogram the FIS internal memory. -------------------------------------------------------------------------------------------------- 3. How about the software updates? We can not ensure that new updates will come. One is sure ・all updates will be free! -------------------------------------------------------------------------------------------------- 4. Can I change the programmer痴 firmware? Yes, firmware update is possible. All firmware updates will be free. -------------------------------------------------------------------------------------------------- 5. Why should I buy this programmer. Pony Prog can almost do the same and is free available! Sometimes almost makes the difference. Our programmer uses special addressing mode what makes the read and write action safer, furthermore a special routine detects the real I2C bus address allowing to program the memory placed on any hardware address. Our hardware can detect traffic on the I2C bus and avoid collisions. Our software can auto detect the coding structure and reprogram the file with a new code ・try to do this with Pony Prog. --------------------------------------------------------------------------------------------------
inokris