OPZAF99GBBT.PDF

(11 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
X
MAKE
OPEL
MOD.
ZAFIRA*
YEAR
99
→
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
CENTRAL UNIT POSITION
Position the compact alarms and the sirens in the engine compartment, behind the
driver’s side headlamp.
Position the modular systems and the modules under the left side of the
dashboard, driver’s side.
+ 30:
connect to the general supply wiring that drives the fuse box.
- 31:
connect with a ring terminal directly to the car body.
+ 15/54:
connect to the 0,75 mm RED wire at the position nr. 4 of the 12 way
black connector of the central doors locking unit behind the sill cover, passenger’s
side.
Connect to the 0,75 mm BLACK/WHITE wire at the position nr. 65 and to the
BLACK/GREEN wire at the position nr. 19 located in the 80 way green connector
behind the bulkhead, driver’s side.
Comfort closing
It is made by the original radio control.
Positive control signal
2
Connect to the 0,75 mm BLUE/BLACK wire for the setting on located at the
2
position nr. 10 in the 28 way black connector and to the 1,5 mm RED/BLACK wire
for the setting off located at the position nr. 8 in the 12 way black connector. The
connectors are located on the coming out of the central doors locking unit behind
the sill cover, passenger’s side.
Note: you can set on the alarm system by pressing for two consecutive times
the closing key of the original radio control.
Fuel pump
2
Cut the 1,5 mm RED/BLUE wire at the position nr. 1 in the 80 way green
connector located behind the bulkhead, driver’s side.
+50:
Cut the 2,5 mm BLACK/RED wire located in the wiring harness coming out of
the ignition key.
Install an additional switch on the headlamp support plate, above the driver’s side
headlamp.
Connect to the 0,5 mm GREY wire at the position nr. 29 in the 80 way green
connector located behind the driver’s side bulkhead.
Connect to the 0,75 mm BROWN/WHITE wire located in the wiring harness
coming out of the boot lamp.
2
2
2
2
2
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
ALARM CONTROLS
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS SWITCH
BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
opzaf99gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin