Zmiana miejsca kabla masowego.pdf

How to ground wire relocation- By: kwg2371

Today I relocated my ground wires since they looked like this( this mod has been done with an optima yellow top battery and is on a 99 mercury

cougar 2.5L v6)

sorry some of the pictures are kinda crapy I need a new camera

Well to start off first thing is first you need to disconnect your battery.

After that take off the air box/ short ram air intake. Then your fuse box

As you can see there is rust

were the ground goes

There will be three gound wires coming out of you fuse block to the metal peice your ground wires goto cut them off (2 of them are connected in the

same place)

You will need TWO 12-10 gauge ring terminals and electrical tap (your choice in color

) it should look like this

There will be a ground wire that is connected from you engine block running behind the fuse box, Take some sand paper and sand it too the metal

(thats only half done on sanding.

I replaced the bigger wire on the metal ground peice with a 5 gauge wire and 5 gauge ring termanels and (remove the metal peice)( cut your new 5

gauge wire as same as the old stock one