Configuring and saving your wireless adapter settings
The settings you specify on this screen do not take effect until you click Apply. The status bar at the bottom of the screen displays real-time details about your wireless connection. Once you apply the settings, they will remain until you change them. You can also create and save multiple profiles and activate whichever one you need to use.
Configuring Settings
1. Select the network name (SSID) of your network. The drop-down list displays all the SSID names being broadcast at your location. The corresponding Infrastructure or Ad Hoc setting is automatically made.
2. If the network name (SSID) you selected requires WEP security settings, you must enter the correct settings. You can use the Networks tab to identify whether or not the particular SSID you will use requires WEP settings. After selecting WEP , enter the passphrase, key size, or manual key settings that the wireless network requires. A red lock symbol in the status bar indicates that WEP is required or the WEP key is incorrect.
3. Click Apply to activate your settings.
Saving Settings in a Profile
1. Enter a name for the profile in the Profiles field.
Tip: If you use a notebook PC to connect to a wireless network at work and at home, create profiles called “work” and “home.” Then, activate whichever one you need for wherever you are located.
2. Click Save Profile.
Starting a Computer-to-Computer (Ad Hoc) Network
1. Fill in the Network Name (SSID) field.
2. Select the Computer-to-computer (Ad Hoc) network type.
3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box displays.
4. If you use a wireless device that supports multiple wireless standards (802.11a, 802.11b, or 802.11g), select the standard and channel you want to use.
5. Click OK.
Configuring Ad Hoc Settings
1. In the Start Ad Hoc field, select the wireless standard (802.11a, 802.11b, or 802.11g) for your Ad Hoc computer-to-computer network.
2. In the Channel field, Automatic should work. If you notice interference problems with another nearby wireless device, select a channel that is not being used by any other wireless networks near your wireless adapter. Use the Networks tab to identify the channels in use in your area.
3. Click OK.
Configuring Profile Priority Settings
1. Click the Priority button.
2. Use the Move up and Move down buttons to adjust the profile priority.
Advanced Settings
Generally, these settings should not require adjustment. Except for the power saving setting, changing any of the settings incorrectly on this screen could cause your wireless connection to fail.
Preamble. A long transmit preamble might provide a more reliable connection or slightly longer range. A short transmit preamble might give slightly better performance.
Transmit Power Control. The 100% means this router uses the original transmit power setting to transmit wireless packets. Reduce the transmit power level can save power consumption of this device if wireless radio is on, however, it also reduces the wireless coverage. If you want to have whole home coverage, NETGEAR recommend you leave it 100%.
Wireless Mode. Select the wireless protocols you will use. Depending on your wireless adapter, you can select some or all of the available 802.11 wireless protocols.
RTS/CTS Threshold. The packet size that is used to determine whether it should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) mechanism or the CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) mechanism for packet transmission. CSMA/CD is slightly more efficient.
krzzlu