GPS Tracker Software Platform User Manual
Content
I.Preparation 1
II. Manual track on google earth 1
III. Track on PDA & cell phone 1
IV. Get location in real street/address name by cell phone. 2
V. Track on Web-based Monitor Center by GPRS 2
VI. Track on PC Installation monitor Software in CD by GPRS. 5
I. Preparation
Load a GSM SIM card into the tracker and subscribe the GPRS service. Please make sure that the SIM card is able to execute the function of incoming calls display, no calls can be diverted and the PIN code is locked. And switch the tracker on.
II. Manual track on Google Earth
2.1 Dial the SIM card number in tracker, it will hang up and reply a SMS with http link and real-time latitude and longitude automatically.
2.2. Install the software in CD in your pc, and open google earth, type the lat/long. from SMS in your cell phone replied from tracker on the blank of google earth, and click OK to get the detailed position of target tracker. As shown
III. Track on PDA & cell phone
3.1 The SMS received from tracker including an http link, enter the link through your PDA or cell phone to get the detailed position anywhere and anytime. As shown below:
3.2. PDA or cell phone for this function must/support pictures viewing/and internet capability.
IV. Get location in real street/address name by cell phone.
4.1 You must set up the APN of your local GSM network for the SIM card in tracker first before using this function, if there is user name and password for GPRS login, Please refer to 5.3 and 5.4 to configure the APN, user name and password for GPRS login.
4.2 After configure the APN, send address+password to device, it will reply SMS including real street/address name. For example: No.113, Nantou Guankou 2nd Rd. Nanshan district, Shenzhen, Guangdong, china.
V. Track on Web-based Monitor Center by GPRS
5.1. The default APN, IP & Port (Default APN is CMNET; IP is 202.104.150.75; port is 9000)
5.2. Obtain IMEI Number
5.2.1 Switch the GPS tracker on, text the tracker a SMS “imei123456” via a cell phone, (123456 is the default password, If you changed the password, pls send SMS with new 6 digits password),a imei number in 15 digits will be return to your cell phone.
5.2.2. All trackers active for tracking on web based monitor center when depart from factory with 7 days, If you want continue after 7 days, please send your IMEI to us, we will active it for one years after your payment, and pay for it again every year.
5.3. APN Configuration
5.3.1. APN standards for Access Point Name and differs from country to country. For more information about the local APN, inquire with your local GPRS network operator.
5.3.2. Text the tracker a SMS “APN123456 + Space +APN of your local GSM net operator” via a cell phone after obtaining your correct APN, and if succeeded in setup, the tracker will return the message “APN OK”
e.g. send SMS command “apn123456 cmnet” to tracker device, If succeeded, “APN OK” is returned by the tracker in SMS.
Notes: 123456 refers to password of tracker and CMNET is the APN of China Mobile (One of GSM network operator in china).
5.4. GPRS Login User Name and Password Configuration
5.4.1 In most countries, the user name and password involving GPRS login are not compulsorily necessary. Therefore, the entry can be skipped. For those countries requiring user name and password, please configure as follows:
5.4.2 Send SMS command “up+123456+Space+User+Space+Password”. If succeeded, “user, password OK” is returned by the tracker in SMS.
E.g. Send SMS “up123456 Jonnes 666666” to the tracker, and if succeeded, the tracker returns "user, password OK". ”
Notes: 123456 refers to password of the tracker, Jonnes user name and 666666 GPRS password.
5.5．IP Address and Port Setup
5.5.1 Send SMS as below via a cell phone: adminip+123456+Space+IP Address+Space+Port Number. The configuration for all subscribers in our web-server monitor center should with our unique IP and port. IP is: 202.104.150.75 port is: 9000. So the SMS command sent by cell phone as following: “adminip123456 202.104.150.75 9000” If configuration goes smoothly, the tracker returns "adminip OK"
5.6 Modes switch between “SMS” and “GPRS”
5.6.1 Send SMS “GPRS+password” to the unit, and it will reply “GPRS ok!” and switch to “GPRS” mode.
5.6.2 Send SMS “SMS+password” to the unit, it will reply “SMS ok!” and restore to “SMS” mode.
5.7. Sign up user ID and password
Enter www.gpstrackerxy.com , click register, setting up a user ID and password and save, and be sure to keep the user ID and password in mind.
5.8．Add IMEI Number
Sign in the system with your user ID and password; add IMEI number in menu of terminal management.
5.9. Control command operation
5.9.1. Clicking the terminal (IMEI) you added in terminal list, and then you can manage all the terminals by clicking the menu on the upper side of the map.
5.9.2 Real time tracking, please click ; and choose intervals as 10S or 20S.
5.9.3 Cancel tracking, please track .
5.9.4 Setting up movement alarm, please click .
5.9.5 Setting up over speed alarm, please click .
5.9.6 Cancel alarms, please click , click this menu to cancel all alarms.
5.9.7 Setting up terminal time, please click .
5.9.8 Cut off the oil and power system, please click , this function is only for vehicle GPS tracker; please operating with caution to avoid dangerous.
5.9.9 Resume the oil and power system, please click , this function is only for vehicle GPS tracker.
5.9.10 ARM, please click , this function is only for vehicle GPS tracker.
5.9.11 DISARM, please click , this function is only for vehicle GP tracker.
5.9.12 Trace Playback, please click , select the time period you want to check, click search and then click play.
5.9.13 Alarm and tracking history, please click .
5.9.14. Account password modification, please click
5.9.15. Add sub-account, please click .
5.9.16. Manage sub-account, you can assign trackers to sub-accounts and set up permissions.
5.9.17 Switching the mode from GPRS into SMS, please send SMS command “SMS+password” to tracker via your cell phone, it will reply “SMS OK” and restore to “SMS” mode.
VI. Track on PC Installation monitor Software in CD by GPRS.
6.1. Your pc is a mini server, and don’t restrict any mid-server operator, the software in one computer can monitor 255 target trackers at most, GPRS data transfer through pc to tracker device real time. the operation steps as following:
6.2. IMEI checking:
Send SMS command "imei+password" to the unit. E. g.: Send SMS command "imei123456" to the unit, a IMEI number in 15 digits will be returned to your cell phone.
6.3. Setting up APN
6.3.1 APN standards for Access Point Name and differs from country to country. For more information about the local APN, inquire with your local GPRS network operator.
6.3.2 Text the tracker a SMS “APN123456 + Space + your local APN” via a cell phone and if succeeded in setup, the tracker will return the message “APN OK”.
6.3.3 e. g. Send SMS command “APN123456 CMNET”. If succeeded, “APN OK” is returned by the tracker in SMS.
Notes: 123456 refers to password of tracker and CMNET is the APN of China Mobile( one of GSM network operator in china.)
6.4 GPRS Login User Name and Password Configuration
6.4.1 In most countries, the user name and password involving GPRS login are not compulsorily necessary. Therefore, the entry can be skipped. For those countries requiring user name and password, please configure as follows:
6.4.2 Send SMS“up + 123456 + Space + User + Space + Password”. If succeeded, “user, password OK” is returned by the tracker in SMS.
6.4.3 For instance, send SMS”up123456 Jonnes 666666” to the tracker, and if succeeded, the tracker returns “user, password OK”
6.5 IP Address and Port Setup
6.5.1. Send SMS as below via a cell phone: adminip + 123456 + Space + IP Address + Space + Port Number. If succeeded, “adminip OK” is returned by the device in SMS.
6.5.2 For example, send SMS command "adminp123456 21.34.116.58 7070" to the tracker. If configuration goes smoothly, the tracker returns "adminip OK"; If there is something wrong then SMS “adminip fail” is received, check out the format of commands sent and password as well.
Note: 123456 refers to password, 21.34.116.85 IP address of the public network to which the computer installed the monitor center software pertains, 7070 the port receiving GPRS data of the monitor center software. The above mentioned port corresponds to an idle computer port.
6.5.3. How to obtain a public IP address?
6.5.3.1 For ADSL subscribers with routing function disenabled, right-click the My Network Place in the Windows NT/2000/2003/XP, click Properties and then select Local Connection in the subsequently popped up window for network connection. At this movement, your public IP address appears in the left lower corner.
6.5.3.2 For ADSL subscribers with routing function enabled, the current IP address refers to an internal IP address such as 192.168.1.103 is internal subscribers. In order to obtain a public IP address, it is required first of all to find out the IP address of the router (the router IP address is a proprietary IP address rather than a public IP address). Type in the router IP address into the location field of the IE explorer and then log into the configuration interface of the router following entering the user name and password of the router. Due to different manufacturers, the router configuration interface may differ from each other. It is strongly recommended you to read through the user’s manual of router.
Attention: As your public IP address is not fixed but dynamic, it changes each time when surfing the internet via dial-up internet access, thus directly resulting in failure of GPRS connection. In such a case, it needs to set up current IP address via following the Step III. If your IP address is fixed, there is no need to consider troubles mentioned before and once set up, it can remain valid for a long-term.
6.5.4 Which are ports that can be configured?
They range from 1024 to 65535 in number and are not allocated to certain service without alteration, this is to say, many services can use one port. Deploy the command Netstat in the Windows 2000/XP/Server 2003 to examine ports in use. Click “Start/Run” in turn and then put “cmd” into the field to open the command prompt symbol window. Type in “netstat –a -n” and then press Enter to display the number and status of port in connection with TCP and UDP in the format of digits
...
wojclucz