Newbieguide_using_Alberts_Easy_Activator.pdf

Guide How To Use

Albert's Easy Activator

Alot of first time users ask how to install a new navcore and how to install a new map and i

thought i'd give a hand how to do it the easy way using Albert's Easy Activator

T his explains how to make a complete fresh install from scratch

However! If you dont want to upgrade your existing ttsystem (navcore) ,you need to patch the

one you have allready, this is possible now in the new vers of Alberts Easy Activator in

Step 6

So there's basicaly 2 ways to do this!

A) Download a new navcore, preferably a SE version from TTuser (no need to patch this)

B) Keep your existing one and just patch it

If you go with option B make sure your navcore support the map you want to install

(see chart below)

First you need to download everything needed for this...the map, navcore and of course

Albert's Easy Activator.

I recomend one of TTuser's SE navcores wich can be found here:

http://www.ipmart-forum.com/showthread.php?t=341350

Links to the new 825 maps can be found here:

http://www.ipmart-forum.com/showthread.php?t=337584

If you dont find what you need or want search the MAP section

and you most likely will find what you're looking for.

Here you can get the tools you need to activate the map.

You'll also find usefull guides here as well:

http://www.ipmart-forum.com/showthread.php?t=341283

• First you need to make a complete backup of your existing setup and store it

somewere safe just in case something goes wrong

• Write down you device ID, it might come in handy,

you'll find it in the ttgo.bif file... you can also find it if you go to

Menu → Change preferences Show version

→

• When you're done with the backup you need to wipe all files on the device or SD-

card or just insert a new SD-card if you have bought a new one.

I usually keep the folder with voices, then you dont need to download them

after you're done. If you have a card-reader you can do this without having

the card inserted in your device, it works equally good either way

• Connect your device to the PC,

copy all files and folders in Basic Pack

from the navcore you choosed

to your device, or SD-card

• Copy the ttsystem file to your

device, or SD-card.

In this case i used v8.410