MINOLTA 1611-2011-SM.pdf

(37002 KB) Pobierz

Di1611_Di2011_F.book

FIELD SERVICE

Di1611/Di2011

2004.3

Ver. 1.0

415596462.051.png

415596462.061.png

415596462.062.png

415596462.063.png

415596462.001.png

415596462.002.png

415596462.003.png

415596462.004.png

SAFETY AND IMPORTANT WARNING ITEMS

Read carefully the Safety and Important Warning Items described below to understand

them before doing service work.

IMPORTANT NOTICE

Because of possible hazards to an inexperienced person servicing this product as well as

the risk of damage to the product, Konica Minolta Business Technologies, INC. (hereafter

called the KMBT) strongly recommends that all servicing be performed only by KMBT-

trained service technicians.

Changes may have been made to this product to improve its performance after this Service

Manual was printed. Accordingly, KMBT does not warrant, either explicitly or implicitly, that

the information contained in this Service Manual is complete and accurate.

The user of this Service Manual must assume all risks of personal injury and/or damage to

the product while servicing the product for which this Service Manual is intended.

Therefore, this Service Manual must be carefully read before doing service work both in the

course of technical training and even after that, for performing maintenance and control of

the product properly.

Keep this Service Manual also for future service.

DESCRIPTION ITEMS FOR DANGER,

In this Service Manual, each of three expressions “ DANGER”, “ WARNING”, and

“ CAUTION” is defined as follows together with a symbol mark to be used in a limited

meaning.

When servicing the product, the relevant works (disassembling, reassembling, adjustment,

repair, maintenance, etc.) need to be conducted with utmost care.

DANGER : Action having a high possibility of suffering death or serious injury

WARNING : Action having a possibility of suffering death or serious injury

CAUTION : Action having a possibility of suffering a slight wound, medium

trouble, and property damage

Symbols used for safety and important warning items are defined as follows:

:Precaution when servicing the product. General precaution Electric hazard

High temperature

:Prohibition when servicing the product. General prohibition

Do not touch

with wet hand

Do not disassemble

:Direction when servicing the product.

General instruction

Unplug

Ground/ Earth

P-1

WARNING AND CAUTION

415596462.005.png

415596462.006.png

415596462.007.png

415596462.008.png

415596462.009.png

415596462.010.png

415596462.011.png

415596462.012.png

415596462.013.png

415596462.014.png

415596462.015.png

415596462.016.png

415596462.017.png

415596462.018.png

415596462.019.png

415596462.020.png

415596462.021.png

415596462.022.png

415596462.023.png

415596462.024.png

415596462.025.png

415596462.026.png

415596462.027.png

415596462.028.png

415596462.029.png

415596462.030.png

415596462.031.png

415596462.032.png

SAFETY WARNINGS

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

Konica Minolta brand products are renowned for their high reliability. This reliability is

achieved through high-quality design and a solid service network.

Product design is a highly complicated and delicate process where numerous mechanical,

physical, and electrical aspects have to be taken into consideration, with the aim of arriving

at proper tolerances and safety factors. For this reason, unauthorized modifications involve

a high risk of degradation in performance and safety. Such modifications are therefore

strictly prohibited. the points listed below are not exhaustive, but they illustrate the reason-

ing behind this policy .

DANGER: PROHIBITED ACTIONS

• Using any cables or power cord not specified by KMBT.

• Using any fuse or thermostat not specified by KMBT.

Safety will not be assured, leading to a risk of fire and

injury.

• Disabling fuse functions or bridging fuse terminals with

wire, metal clips, solder or similar object.

• Disabling relay functions (such as wedging paper between

relay contacts)

• Disabling safety functions (interlocks, safety circuits, etc.)

Safety will not be assured, leading to a risk of fire and

injury.

• Making any modification to the product unless instructed

by KMBT

P-2

1. MODIFICATIONS NOT AUTHORIZED BY

415596462.033.png

415596462.034.png

415596462.035.png

415596462.036.png

415596462.037.png

415596462.038.png

415596462.039.png

415596462.040.png

415596462.041.png

415596462.042.png

415596462.043.png

415596462.044.png

DANGER: PROHIBITED ACTIONS

• Using parts not specified by KMBT

2. CHECKPOINTS WHEN PERFORMING ON-SITE SER-

VICE

Konica Minolta brand products are extensively tested before shipping, to ensure that all

applicable safety standards are met, in order to protect the customer and customer engi-

neer (hereafter called the CE) from the risk of injury. However, in daily use, any electrical

equipment may be subject to parts wear and eventual failure. In order to maintain safety

and reliability, the CE must perform regular safety checks.

1. Power Supply

WARNING: Wall Outlet

• Check that mains voltage is as specified. Plug the power

cord into the dedicated wall outlet with a capacity greater

than the maximum power consumption.

If excessive current flows in the wall outlet, fire may

result.

• If two or more power cords can be plugged into the wall

outlet, the total load must not exceed the rating of the wall

outlet.

If excessive current flows in the wall outlet, fire may

result.

WARNING: Power Plug and Cord

• Make sure the power cord is plugged in the wall outlet

securely.

Contact problems may lead to increased resistance,

overheating, and the risk of fire.

P-3

415596462.045.png

415596462.046.png

415596462.047.png

415596462.048.png

415596462.049.png

415596462.050.png

415596462.052.png

415596462.053.png

415596462.054.png

415596462.055.png

WARNING: Power Plug and Cord

• Check whether the power cord is damaged. Check

whether the sheath is damaged.

If the power plug, cord, or sheath is damaged, replace

with a new power cord (with plug and connector on each

end) specified by KMBT. Using the damaged power cord

may result in fire or electric shock.

• When using the power cord (inlet type) that came with this

product, be sure to observe the following precautions:

a. Make sure the connector is securely inserted in the inlet

on the rear panel of the product.

Secure the cord with a fixture properly.

b. If the power cord or sheath is damaged, replace with a

new power cord (with plugs on both ends) specified by

KMBT.

If the power cord (inlet type) is not connected to the

product securely, a contact problem may lead to

increased resistance, overheating, and risk of fire.

• Check whether the power cord is not stepped on or

pinched by a table and so on.

Overheating may occur there, leading to a risk of fire.

• Do not bundle or tie the power cord.

Overheating may occur there, leading to a risk of fire.

• Check whether dust is collected around the power plug

and wall outlet.

Using the power plug and wall outlet without removing

dust may result in fire.

• Do not insert the power plug into the wall outlet with a wet

hand.

The risk of electric shock exists.

• When unplugging the power cord, grasp the plug, not the

cable.

The cable may be broken, leading to a risk of fire and

electric shock.

P-4

415596462.056.png

415596462.057.png

415596462.058.png

415596462.059.png

415596462.060.png

Plik z chomika:

Inne pliki z tego folderu:

MINOLTA pp1250e 1200w pc.pdf (1103 KB)
MINOLTA pp8_8e_8l.pdf (1440 KB)
MINOLTA Page_Works Pro 8 series.pdf (1209 KB)
MINOLTA mc2300sm.pdf (2865 KB)
MINOLTA ep6000-sm_150.pdf (5033 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin