FOTRA98GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FORD

MOD. TRANSIT YEAR 98 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the left

lateral panel of the wing, passenger’s side. The modular systems and the modules

should be positioned under the dashboard, passenger’s side.

POWER SUPPLY

+ 30: connect to the general supply wiring located in the fuse box.

- 31: connect to the car body.

IGNITION WIRE

+ 15/54: connect to the VIOLET/BLUE wire located in the wiring harness coming

out of the multiway connector behind the left panel, driver’s side.

DIRECTION INDICATORS

Connect to the BLUE and BLUE/BROWN wires located in the wiring harness

coming out of the connector of the lights switch.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the YELLOW wire located in the wiring harness coming out of the windows

control switch, driver’s side.

Front window, passenger’s side:

cut the WHITE/VIOLET wire located in the wiring harness coming out of the

multiway connector, behind the lateral panel, driver’s side.

CENTRAL DOORS LOCKING Positive control signal

Connect to the 1 mm 2 WHITE/VIOLET wire (unlock) and to the YELLOW/BLACK

wire (lock) located in the wiring harness coming out of the multiway connector

behind the lateral panel, driver’s side.

IMMOBILISATION POINT 1

Fuel pump

Cut the 1,5 mm 2 YELLOW/BLACK wire located in the wiring harness coming out of

the multiway connector, under the black plastic cover near the battery.

IMMOBILISATION POINT 2

Electronic ignition cut

Cut the GREEN/BLUE wire located in the wiring harness coming out of the brown

relay in the black plastic box, on the left of the engine compartment, passenger’s

side.

STARTER

+50: Cut the BLACK/YELLOW wire located in the wiring harness of the connector

of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the bonnet bumper

rubber.

DOORS SWITCH

Connect to the BLACK/GREEN wire located in the white connector, behind the

fuse box and to the BLACK/BLUE wire coming out of the yellow relay, in the fuse

box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fotra98gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: