LAPHE02GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

LANCIA

MOD. PHEDRA YEAR. 02 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment along

the coolant bowl. Pass the cables using the oval rubber core hitch above the

right front shock absorber, behind the covering. It is suggested to take down

the passenger’s side glove compartment.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the left side of the

dashboard, driver’s side.

POWER SUPPLY

+30: connect to the 4 mm 2 RED wire located in the multiway fuse box.

-31: connect to the original ground terminal located behind the driver’s side

left lateral bulkhead.

IGNITION WIRE

+15/54: connect to the 1,5 mm 2 PINK/RED wire, at the position nr. 2, in the

wiring harness coming out of the 16 way green connector, in the fuse box.

DIRECTION INDICATORS

Connect to the WHITE wire at the position nr. 13, and to the BROWN wire at

the position nr. 14, located in the 16 way black connector, in the fuse box.

ELECTRIC WINDOWS

Positive control signal

To obtain the windows closing it is necessary to intervene directly in the

wiring harness coming out of each motor, inside to each door.

CENTRAL DOORS LOCKING Original door motor direct control

Refer to the fitting diagram nr.176 - ‘B’ section - for the 7900 serie

antithefts and to the fitting diagram nr. 176 - ‘A’ section - for the 3100 and

3900 series antithefts.

IMMOBILISATION POINT

Fuel pump

Cut the 1,5 mm 2 BLUE wire located in the connector coming out of the

ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the bonnet

bumper rubber.

DOORS SWITCH

Connect to the BROWN wire, at the position nr. 32, coming out of the 40 way

white covering connector, in the BSI central.

Note: it is a control with positive polarity.

BOOT SWITCH

Connect to the LIGHT BLUE wire, at the position nr.16, located in the wiring

harness coming out of the 40 way grey connector, in the BSI cental.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

laphe02gbb.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR.176

Diagram to connect the central locking with

3100 and 3900 series antithefts

‘ A’ Section

VIOLET/WHITE ORANGE VIOLET

ORANGE/WHITE GREY/BLACK YELLOW/BLACK

+30

16 way grey connector

in the fuse box

Pos. Nr. 15

‘B’ Section

Diagram to connect the central locking with

Bridge serie antithefts

VIOLET/ORANGE ORANGE VIOLET

GREY/BLACK YELLOW/BLACK

+30

16 way grey connector

in the fuse box

Pos. n° 15

P OS . n° 13

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

laphe02gbb.doc

Pos. Nr. 13

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: