FIPUN04GBDT.PDF

(48 KB) Pobierz
FIPUN04GBDT.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
FIAT
MOD.
PUNTO*
YEAR 04 fi
PETROL
DIESEL
X
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment near the
support of the battery. Pass the cables through the original rubber sleeve near
the brake fluid reservoir.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+30: connect to the 6 mm 2 WHITE/RED wire located in the multiway connector in
the fuse box.
-31: connect with a ring terminal directly to the car body.
IGNITION WIRE
+ 15/54: connect to the 2 mm 2 BLUE wire located in the connector coming out of
the ignition key.
DIRECTION INDICATORS
Connect to the 1 mm 2 PINK wire at the position nr.39 and to the PINK/WHITE
wire at the position nr.38, in the 40 way black connector located in the front part of
the fuse box.
ELECTRIC WINDOWS
Controls with mixed polarity
Front window, driver’s side:
cut the 2,5 mm 2 WHITE/RED and VIOLET/YELLOW wires.
Front window, passenger’s side:
cut the 2,5 mm 2 VIOLET/BLACK wire.
These connections should be made in the wiring harnesses coming out of each
switches control.
ACTIVAT./DEACTIVATION
CONTROLS
Connections for art. 3800
To make this connection refer to the fitting diagram nr. 207 .
IMMOBILISATION POINT
Gasoil pump
Cut the ORANGE/WHITE bond on the black connector, in the lower part of the
relay box located near the battery.
STARTER
+50: Cut the BROWN wire located in the wiring harness coming out of the ignition
key.
BONNET SWITCH
Install an additional switch on the headlamp support plate.
DOORS SWITCH
Connect to the wires: RED at the position nr.8, WHITE/GREEN at the position
nr.16, GREEN/GREY at the position nr.25, BLUE/VIOLET at the position nr.26, of
the 40 way connector, in the fuse box.
Refer to the fitting diagram nr. 208.
BOOT SWITCH
Connect to the LIGHT BLUE/BLACK wire at the position nr.36 of the 40 way
connector, in the fuse box.
Refer to the fitting diagram nr. 208.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fipun04gbdt.doc
108370415.010.png 108370415.011.png 108370415.012.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM NR. 207
Diagram to connect art. 3800 on
FIAT PUNTO year 2004
ORANGE/WHITE YELLOW/BLACK GREY/BLACK VIOLET/WHITE
ORANGE VIOLET
ground
32 way black connector
in the fuse box
YELLOW pos. nr.18
M
GREY pos. nr.16
Switch on opening
40 way black connector
in the fuse box
Diode 1N4004
BLUE/BLACK
pos. nr.17
Switch on opening
BLUE/VIOLET
ground
pos. nr. 24
Diode 1N4004
ground
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fipun04gbdt.doc
108370415.013.png 108370415.001.png 108370415.002.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM NR. 208
Diagram for perimetrical connection with separated lines
1N4007 diodes
40 way black connector
LIGHT BLUE/BLACK pos. nr. 36
WHITE/GREEN pos. nr. 16
GREEN/GREY pos. nr. 25
BLUE/VIOLET nr. 26
RED pos. nr. 8
1N4007 diodes
BLEU/PINK
(of the antitheft)
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fipun04gbdt.doc
108370415.003.png 108370415.004.png 108370415.005.png 108370415.006.png 108370415.007.png 108370415.008.png 108370415.009.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin