R1200R.pdf

R 1200 R

Wind protection:

“Vario” or “R-Stream” screen

for any riding style.

Look back: A selection

of beautiful mirrors

made by RIZOMA

Variable tailor made luggage

systems and clever solutions

for short and long travel

Rear Light “Triton2”:

Powerful LED technology

with a telling design

Prevent possible damage

to Telelever and forks:

Steering Stop

Engine and cylinder head

protection in three

colour variations.

Oil and air filters,

tools and service items:

All available for the R.

Tornado Hub Cover:

A beautiful technical

solution for the rear hub.

R 1200 R

Touring Screen “R-Stream”

The ultimate long range touring screen with excellent aero

dynamic properties. The whole design was aimed at providing

the best possible protection for the rider. The effective, com-

plex shape means adjustments are not needed. The air stream

is effectively channelled away from the rider, who enjoys a

turbulent-free and protected ride. The gap between screen

and head lamp allows some air to enter behind the screen

to reduce turbulence and negative pressure. Made of thick,

scratch-resistant Lexan plastic in excellent quality. The screen

is mounted on 4 points to strong steel brackets for a solid,

vibration-free attachment. A substantial improvement of any

“R”. Sold complete with ﬁtting kit. TÜV approved.

Height recommendation:

The screen is sold in 3 height options (measured from top of

head lamp). We recommend the following:

High Version

Low: A touring screen with a good reduction of pressure

on the upper body and helmet.

Height/width = 345/440 mm (13,6/17,3”)

Medium: Additional reduction of pressure on the arms, for rid-

ers up to 1,70 m height provides a very good touring

comfort.

Height/width = 400/500 mm (15,8/19,7”)

High: The long range touring screen with the ultimate wind

and weather protection properties.

Height/width = 460/500 mm (23,6/18,1”)

Low

Part No.: 8110121

Medium

Part No.: 8110122

High

Part No.: 8110123

Medium Version

Low Version

Vario Screen

Not “either - or”, but rather a sport and a touring screen in

one. This is a two part screen, where the top portion is verti-

cally adjustable. The screen‘s height can be quickly and easily

adjusted by loosening the two thumb screws and sliding the

upper section to the desired position. Some air ﬂows beneath

the upper part of the shield, equalizing pressure and greatly

reducing turbulence and buffeting. The easy and fast adjust-

ment has the beneﬁt that it allows the screen to be matched

to various riders and riding conditions, for instance on hot

days the screen can be lowered to enjoy better cooling, and

on long touring or wet days the screen is fully extended. The

screen can be tilted on the bracket joints as well, so that a

good set-up for every rider can be found. The screen is made

of a robust, optically clean and fuel resistant material. ABE

approved. Please order one screen and one bracket kit

(see below).

Vario Screen R 1200 R

Part No.: 8110240

Bracket Kit for Vario Screen

For the new R models we wanted to have a different ﬁtting

method than the ones attached with clips to the handle

bars, so we designed a special new bracket. The brackets are

wrapped tightly around the instruments on both sides so the

screen and bracket unit looks integrated and part of the bike.

Made of strong and solid metal with all parts needed for in-

stallation.

Bracket Kit for R 1200 R Vario screen Part No.: 8110249

“Low Position” “High” Position

Wunderlich Test Ride Service

Most of our international dealers offer the Wunderlich

Test Ride Service. This means you can fit and ride

with one of our screens on your bike, before deciding

which one you like best. Ask your local Wunderlich

dealer for details.

R 1200 R

Touring-R Handle Bars

Everyone who proudly owns the new 1200 R knows that it is

a versatile bike that combines great handling, a strong motor

and lots of character. With various aftermarket parts available

such as screens, footrests and bags it can be transformed into

a great touring machine. The last link for a perfect touring

experience are the handlebars. The “Touring-R” are slightly

wider, reach further back and are closer to the rider than the

original. This lets the rider assume an upright and relaxed

riding position. The length is (without bar weights) 800 mm

(31.5”) compared to the original 770 mm (30,3”), and it

reaches 65 mm (2,6”) further back (can be varied depend-

ing on ﬁtting angle). It is suitable for use with the original

heated grips, and is sold with a set of aluminium anodised

handle bar weights and a longer brake line. Made of high gloss

chromed steel. TÜV approved.

Note: Cannot be used together with handle bar risers as cables + wir-

ing will be too short.

R 1200 R Touring-R Handle Bars Part No.: 8161653

Handle Bar Riser

Handle bar risers are a much needed option to change and

improve riding and seating comfort. Combined with our foot

rest lowering sets the best riding position can be achieved.

• 25 mm taller and move bars slightly towards rider

• Relaxed, upright seating position

• CNC machined of high quality aluminium (not cast)

• Anodised silver

• Easy to ﬁt, no modiﬁcation to bike needed.

• Sold as a set of 2 bar risers with ﬁtting kit and bolts

• ABE approved

Because now the bars are mounted higher there is a larger

bar angle adjustment range; This helps with ﬁnding the best

possible seating position.

Part No.: 8161603

Vario Risers

These risers give the option for three different handle bar

positions, allowing the rider to adjust the riding position for

different situations. The positions are easily changed without

the need to completely remove the handlebars. In position

1 the bars are raised by 29 mm (1.1”), and positions 2 + 3

move the bars 16 or 32 mm (0.6 or 1.2”) back towards the

rider in addition to the raised height. Since the handlebar tilt

angle can be changed as well as the position, a large range of

adjustment is possible. Machined from high quality aluminium

and then anodised silver. A Boxer emblem is included, this

can be replaced with an original BMW emblem (not included,

please buy from your dealer, part # 71609056263). TÜV ap-

proved.

R 1200 R Vario Risers

Part No.: 8161604

R 1200 R

VarioLever

An exclusive, user friendly and ergonomic lever revolution: We

have developed a brake and clutch lever that is adjustable for both

reach and length that can be dialled in for individual riding needs.

Simply loosen the ﬁxing screw and the lever length can be

changed. Especially for bikes with the strong power assist-

ed Integral ABS brake systems a shorter lever allows better

“feel”. With the VarioLever it is possible to brake with two

or three ﬁngers without squashing the other ﬁngers. This

goes for the clutch as well. Fully extended, the lever is about

the same length as the original, and the full braking force

can be applied. An additional new feature is the easy ad-

justability of the lever reach, which can easily be applied

while riding. This adjustment is traditionally used in racing

but also important on fast mountain riding where adjust-

ment of the lever is required to compensate for brake fade.

Even with thick winter gloves the large adjustment wheel

can easily be turned with an outstretched index ﬁnger.

The levers are precision CNC machined out of top quality

aluminium alloy (AL 7075 T6) as often used in aircraft or

space applications and are therefore extremely strong. Even

with a fully extended lever a force of over 60 Kg/ 132 lb

(!) can be applied without problems on the outer tip.

The anodised aluminium lever construction allowed us a mul-

titude of colour combinations, and we have put together a

selection of 6 of the nicest looking variations.

Perfect control

and grip

Easy to adjust

while riding

Unique design

Brake lever

Silver/blue

Part No.: 8160200

Silver/titanium

Part No.: 8160205

Titanium /silver

Part No.: 8160210

Titanium/blue

Part No.: 8160215

Black/silver

Part No.: 8161485

Black

Part No.: 8160290

Stepless length adjustment

Clutch lever

Silver/blue

Part No.: 8160220

Silver/titanium

Part No.: 8160225

Titanium /silver

Part No.: 8160230

Titanium/blue

Part No.: 8160235

Silver/blue

Black/silver

Part No.: 8161490

Black

Part No.: 8160295

Silver/titanium

Titanium/silver

Titanium/blue

Black

Black/silver

R 1200 R

Cruise Control

This is a simple but effective cruise control solution. On long

riding stints the throttle hand can become tired and cramped;

However, with the cruise control installed this becomes less

of a problem. The Cruise Control is ﬁtted instead of the right

hand side end weight, and simply by turning the adjustment

wheel the Cruise control applies pressure onto the twist grip.

The adjustment wheel has wide spaced teeth that allow easy

turning of it even while wearing a glove, so it can be dialled

for exactly the required pressure. To disable, the adjustment

wheel is simply turned the other direction and in a matter of

seconds the twist grip returns to normal function.

The sets consists of a silver anodised light weight aluminium

body “Cruise Control” with a blue adjustment wheel, as well as

matching silver aluminium left side bar end weight complete

with new ﬁtting bolts.

Cruise Control + end weight set Part No.: 8161602

As an addition to

the Cruise Control:

Throttle Rocker

For Throttle Rocker, the

clever little helper that

helps reduce cramps

on long trips. See our

“Accessories” section for

details.

“Pro Sports” Handle Bar End Weights

A good looking and 0,7 kg lighter replacement for the original

bar weights. Allows some of the typical Boxer vibes to reach

the rider giving a classic “feel” when riding the modern “R”.

Made of good quality silver or black anodised aluminium. Sold

as a complete set of two end weights including bolts.

Silver anodised

Part No.: 8161600

Black anodised

Part No.: 8161601

News + Updates

Download all the updated catalogue sections from

www.wunderlich.de/update

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: