with Outsourced.9026 can you save RAM. Drop complete Folder in root. Files which exist in Folder Outsourced remove it then alone from RAM. With a File ttgo.bak, with your latest official Device-Navcore-Numbers, in root see Home not more the wrong Version. Need you only if your Device has official NOT this Version here. You can create alone a ttgo.bak with correct Numbers or use inbuild auto Creation. Use version.txt in root or /Config with your needed Numbers. Current for: TomTom GO, GO x00, GO x10, ONE 1st Edition, ONE 2nd Edition A:7903 B:9183 Rider A:7901 B:9181 some ONE 30-Series, XL 30-Series, ONE XL, ONE 3rd Edition A:8010 B:9369 XL Live 2009 A:8419 B:1257 Start A:8544 B:1836 x20,x30,630 A:8351 B:9982 x40 A:8371 B:450680 With the Switchfiles in Root or in Folder Config can you configure alone your Device. Use the Files in root or /Config. Only root or Folder Config, NOT both! you can also write the switchfile Names in a File setconfig.txt to know how see into the Example File Settings with a own unique Value needs a : on End model: changedtext: sdid: with setconfig.txt works the single switchfiles not more except a seperate model.txt override the model: Entry in setconfig.txt model.txt + cycle.txt version.txt works only separate TTSoff = switch TTS off, not for Devices with original TTS FMon = FMTransmitter on (for x10) FMoff = switch auto enabled FM by some Emus again off, only for Device without FM, Mp3-Player not more available btoff = disable BT, if you not need, save then a little more RAM bton = if you not have BT enable it Button for Speedcams in Menu noqfixdel = disable Quickfix erase after you have press reset, if you wonder where is gone qfixfiles normally, not for Sirf noautooutsource = 32MB Device do outsource as Standard, to disable that delgns = remove (Start,supend) old TMC-Data (gns/gnsdata) delmap = delete each boot currentmap.dat cleanflash= delete all from Flash what is possible (*.mac etc.), Settings lost runcheck = check a few "important" Files, view config.txt for Result changedtext: = you can change the Text on Status/Info Screen, write your own Text in the File SDid: = write for each SD/Memory a other Number inside and you can for each use a own different Mainsetting usesetting= use always Settings from SD, not the in Device itself saved Settings fixtmc = if your Antenna cant find a Station, (mainly x10) fixpna = rewrite the broken Map .pna File model: =see down model.txt = write one from following inside ori = switch to your real Device x20 = switch to x20 Emulation x30 = switch to x30 Emulation x40 = switch to x40 Emulation x40light(2,3) = similar to x40 Emu. no Voice Input and BT Stuff x50 xls x40 is Standard cycle.txt = switch each reset between Setting from cycle.txt <> model.txt It Backup also the Mainsettings between both Emus.
ping99